Advertisement
Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and
facing the front. Secure using two l/4-20xllA '' screws, 7ram lock washers, and 7ram flat washers on each side.
7ram Lockwasher
7ram flat washer
Qty.4
Qty.4
1/4-20×11/2" screw
Qty.4
7ramflat
7ramlock
1/4-20×11/2 ''
washer
washer
screw
Inside of cart, insert rear shield into left slot(#1) on top of lower back panel. Insert left grease tray rail into slot(#2) beneath
grease tray opening in upper back panel, shown A. Attach front shield and left grease tray rail under front brace(#4 and #5)
with two #8x3/8" self-tapping screws, shown B. Insert right grease tray rail into slot(#3) and attach it under front brace(#6)
with one #8x3/8" self-tapping screws, shown NB.
#8x3/8"self-tappingscrew
Qty.3
Tank heat s hield
Note:some parts omitted
for clarity of illustration
20
Grease trayopening
Advertisement
