Voip System Telephones; Device Properties - Aastra 800 User Manual

Voice over IP (VoIP)
Features
Blind Transfer
Keypad as "INFO"
message
7.4

VoIP System Telephones

The following telephones and software packages are available for VoIP system
telephony:
■
Aastra 6773ip (OpenPhone 73 IP): This system telephone can be extended with
up to three key extensions Aastra M671.
■
Aastra 6775ip (OpenPhone 75 IP): This system telephone can be extended with
up to three key extensions Aastra M671 or Aastra M676).
■
Aastra 277xip (OpenPhone 7x IPC): This VoIP software offers the functionality
of an IP system telephone using Windows 2000/XP executable software (see
Aastra 277xip (OpenPhone 7x IPC) starting on page 79). This software also pro-
vides local answering machine functionality and can be integrated into CTI
applications.
■
The older VoIP system telephones OpenPhone 63 IP and OpenPhone 65 IP can
still be used.

7.4.1 Device Properties

The VoIP system telephones offer the following specific device properties:
■
Two RJ45 connector ports are available for ethernet connection. The ports are
connected to one another via the telephone's internal switch. The switch sup-
ports 10 Mbit/s or 100 Mbit/s full-duplex with priority given to VoIP data trans-
mission.
Notes
SIP only: forwarding an incoming call without
accepting the call; feature must be supported by SIP
telephone or by the SIP software.
DTMF tones cannot be securely transferred "in band"
via compression codecs. Digital "out band" transferral
as "INFO" SIP message is supported. This feature must
be available and activated on a SIP telephone or in
the SIP software.
VoIP System Telephones
71