Setting Up Video Telephony; Address Queries Using Ldap - Aastra 800 User Manual

Configuring the PC Software
13.3

Setting up Video Telephony

You can use the OpenCTI to switch on the video function during an internal call.
To be able do this, the Microsoft NetMeeting 3.0 program must be installed and
set up on all participating workstation computers.
Setting up Microsoft NetMeeting 3.0
1. Connect a standard web cam to the workplace computer and install the driver.
2. In the Windows Start menu select Run and enter: "conf.exe". Confirm your
selection with OK.
3. Follow the instructions of the Install Wizard. Registration in an Internet
directory is not necessary and is not recommended. Select the installed web
cam and exit the Install Wizard.
4. Run a functionality test. To do this, start the NetMeeting program. Click on the
call button. Under Address enter the IP address or DNS host name of a external
station. Confirm your selection with Call.
13.4

Address Queries using LDAP

You can search the data of the central telephone book of the Aastra 800 from a
workstation computer in the LAN using LDAP (Lightweight Directory Access Pro-
tocol). When configuring an LDAP-enabled program, specify the IP address of the
Aastra 800 as the address of the LDAP server.
LDAP with Outlook Express
You can configure and operate the LDAP directory service with Outlook Express
TM
a Microsoft e-mail program, as follows:
Note: NetMeeting is already pre-installed on the Microsoft
Windows XP operating systems.
Note: If Firewall software is installed on the workstation
computer, a warning will now appear. This shows that the
computer is now ready to receive the NetMeeting. You must
allow the NetMeeting, by activating the Do not show this
message for this program again option for example.
Setting up Video Telephony
TM
,
123