Aastra 677Xip (Openphone 7X Ip) System Telephones; Power Supply Unit; Key Extensions - Aastra 800 User Manual

Aastra 677xip (OpenPhone 7x IP) System Telephones: Extensions and Accessories
5. Aastra 677xip (OpenPhone 7x IP)
System Telephones: Extensions
and Accessories
5.1

Power Supply Unit

The power supply unit 4516000 (in Britain operate only the AC adapter with the
part no. 4516001) is required when using the Aastra 677xip (OpenPhone 7x IP) IP
system telephones – with or without key extension – where no Power over LAN is
available in the network.
Connecting the Power Supply Unit to an IP Telephone
The connector for the power supply unit is in the bottom of the telephone's casing
and is indicated by the symbol
1. Plug the power supply unit's RJ45 jack into the socket provided.
2. Pass the power supply unit's cable through the recesses on the underside of
the IP system telephone.
3. Connect the power supply unit to the mains power supply (see Connecting the
Key Extension starting on page 47).
5.2

Key Extensions

Up to three key extensions can be connected to system telephones: either three
key extensions of the model Aastra M671 or three key extensions of the model
Aastra M676. A combination of these key extensions is, however, not possible.
.
Power
45