Pickup; Hunt Groups; Examples Of Use; Enquiry Station For An Operator With Two System Telephones - Aastra 800 User Manual

Pc software for voice communication via voip
Hide thumbs Also See for 800:
Table of Contents

Advertisement

Call Queue
If a call is to be forwarded "After delay", it enters the queue. If the call has not been
answered before the delay period expires, it will be forwarded to the target ter-
minal and can then be answered there.

11.1.3 Pickup

The functions "Pickup from group" and "Pickup selective" can be used together
with queues. A user who accepts a call using "Pickup from group" or "Pickup
selective" picks up the next call from the queue.

11.1.4 Hunt Groups

Hunt groups of the "parallel" type are usually used together with queues, with the
queues of each telephone in the group being synchronised to each other. When a
call to the number of the hunt group arrives, the call enters all parallel queues. If a
call from one of the queues is answered, it is removed from all other parallel
queues.
11.2

Examples of Use

11.2.1 Enquiry Station for an Operator with Two
System Telephones
The operator switches all incoming calls and can either work on the Aastra 6775ip
(OpenPhone 75 IP) or the mobile terminal, the OpenPhone 27.
Configuration
Configure the Aastra 6775ip (OpenPhone 75 IP) and e.g. a base station (RFP)
under Telephony: Devices.
Configure a trunk key for the Aastra 6775ip (OpenPhone 75 IP) under
Telephony: Devices: System telephones.
Configure the OpenPhone 27 under Telephony: Devices: DECT phones and
assign the OpenPhone 27 its own telephone number. Check in the
OpenPhone 27.
110
Examples of Use

Advertisement

Table of Contents
loading

Table of Contents