Installing The Drive Cage - Dell OptiPlex 390 Small Form Factor Owner's Manual

Installing The Drive Cage

Place the drive cage on the edge of the computer to allow access to the 1 .
. cable connectors on the hard drive
. Connect the data cable and power cable to the back of the hard drive 2 .
Flip over the drive cage and insert it into the chassis. The drive cage tabs 3 .
. are secured by the slots in the chassis
Slide the drive-cage handle toward the front of the computer into the 4 .
. locked position
. Connect the data cable and power cable to the back of the optical drive 5 .
front bezel
. Install the 6 .
cover
. Install the 7 .
After Working Inside Your Computer
. Follow the procedures in 8 .
51