Installing The Heat Sink And Processor - Dell OptiPlex 390 Small Form Factor Owner's Manual

Insert the processor into the processor socket. Ensure the processor is
Press the release lever down and then move it inward to secure it with the
Tighten the captive screws to secure the heat-sink assembly to the system
Secure the Input/Output Board or the FlyWire cable to the routing channel
. Connect the heat sink assembly cable to the system board
. Follow the procedures in

Installing The Heat Sink And Processor

. Place the heat sink assembly into the chassis
After Working Inside Your Computer
. properly seated
. Lower the processor cover
. retention hook
. on the heat sink
drive cage
. Install the
front bezel
. Install the
. Install the
1 .
2 .
3 .
4 .
5 .
. board
6 .
7 .
8 .
9 .
cover
. 10
. 11
30