Dell OptiPlex 390 Small Form Factor Owner's Manual page 58

Device Information: Displays SATA-0, SATA-1, SATA-2,
Allows you to specify the order in which the computer attempts
to find an operating system from the devices specified in this
Allows you to set the date and time settings. Changes to the
. system date and time take effect immediately
Allows you to enable or disable the integrated network card.
NOTE: Depending on the computer and its installed devices,
. the items listed in this section may or may not appear
Allows you to set the serial port settings. You can set the serial
NOTE: The operating system may allocate resources even
Allows you to configure the operating mode of the integrated
. SATA-3, and LOM MAC Address
USB Storage Device
CD/DVD/CD-RW Drive
: You can set the integrated NIC to
( Enabled (default
Enabled w/PXE
Enabled w/ImageServer
. though the setting is disabled
. hard drive controller
•
. list
•
•
Onboard NIC •
System Configuration
Disabled •
•
•
•
: port to
Disabled •
Auto •
COM1 •
COM2 •
COM3 •
COM4 •
General
Boot Sequence
Date/Time
Integrated NIC
Serial Port
SATA Operation
58