Dell OptiPlex 390 Small Form Factor Owner's Manual page 64

NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to "Enabled
Specifies the primary static IP address of the ImageServer with
which the client software communicates. The default IP
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to "Enabled
with ImageServer" and when "Lookup Method" is set to
Specifies the primary IP port of the ImageServer with which the
. client communicates. The default IP port is 06910
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to "Enabled
. Specifies how the client obtains the IP address
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to "Enabled
Specifies the static IP address of the client. The default IP
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to "Enabled
with ImageServer" and when "Client DHCP" is set to "Static
Specifies the subnet mask of the client. The default setting is
." with ImageServer
. address is 255.255.255.255
." "Static IP
." with ImageServer
Static IP
( DNS (enabled by default
." with ImageServer
. address is 255.255.255.255
. 255.255.255.255
Image Server
ImageServer IP
ImageServer Port
Client DHCP
•
•
." IP
Client Subnet Mask
Client IP
64