Safety Information
Product Overview
STI-ENC
The STI-ENC interface board allows the user access to the encoder feedback connector (J6) on the EP drive. The
STI-ENC plugs directly in J6 on the bottom of the drive. The numbers printed on the connector label correlate to the
screw terminal numbers.
Do not allow ESD directly to terminals. Always discharge static electricity to enclosure, not the drive when
performing maintenance.
Shield connection points are connected from the shell of the "D" connector to the faston lug connector.
Figure 50:
Options and Accessories
Installation
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
STI-ENC Drive Encoder Feedback Board
Options and
Diagnostics
Accessories
Specification
53