Safety Information
Product Overview
STI-SNCI
The STI-SNCI interface board allows access to the sync input connections on the EP drive. The STI-SNCI plugs
directly into the J10 connector on the bottom of the drive. The numbers printed on the connector label correlate to
the screw terminal numbers.
Do not allow ESD directly to terminals. Always discharge static electricity to enclosure, not the drive when
performing maintenance.
Shield connection points are connected from the shell of the "D" connector to the faston lug connector.
Figure 49:
52
Installation
STI-SNCI Drive Sync In Breakout Board
Diagnostics
1 2 3 4
5 6 7 8
Options and
Specification
Accessories