Emerson Epsilon EP Drive 400518-01 Installation Manual page 21

Safety Information Product Overview
The following table applies to the "A" dimension as shown in figure 5 for the programming drives.
5.94
[150.88]
5.22
[132.59]
Figure 5:
To prevent drive from dropping out of position during installation, partially pre-install lower mounting screws,
then set drive in place with lower mounting screws in slots and then install at least one upper mounting screw.
For removal, loosen lower screws, remove upper screws and lift drive out.
Installation
Installation
Drive Model
EP202-Pxx-xxxx
EP204-Pxx-xxxx
EP206-Pxx-xxxx
Mechanical Drawing for Epsilon Programming Drive
Diagnostics
Dimension "A" Minimum Panel Width
inches [mm]
2.69 [68.3]
2.69 [68.3]
3.40 [86.4]
.200
[5.08]
8.099
[205.72]
7.70
[195.58]
Options and
Specification
Accessories
inches [mm]
3.45 [88]
3.45 [88]
4.15 [105]
"A"
2.69
[68.3]
1.20
1.03
[30.48]
[26.16]
(4X)Ø.219
[5.56]
9