Removing A Card From The Optional Riser-Card Cage - Dell OptiPlex 360 Service Manual

Removing a Card From the Optional Riser-Card
Cage
NOTE:
The riser-card cage is an option for the desktop computer only.
1 Follow the procedure in "Before Working on Your Computer" on page 9.
2 Remove the computer cover (see "Removing the Desktop Computer
Cover" on page 21).
3 Remove the riser-card cage:
Check any cables connected to cards through the back panel openings.
a
Rotate the riser-card cage handle up and gently pull on the handle and
b
lift the riser-card cage up and away from the computer.
1 riser-card cage
3 riser cards (2)
4 Gently push the release lever on the card retention latch to pivot the latch
open. The latch remains in the open position.
5 Disconnect any card cables from the system board (see "Desktop
Computer System Board Components" on page 15).
6 Grasp the card by its top corners, and ease it out of its connector.
50
Cards
2 handle
1
2
3