Replacing The Power Supply In The Mini Tower Computer - Dell OptiPlex 360 Service Manual

1 release button
3 screws (4)
6 Press down on the release button on the floor of the computer chassis, and
slide the power supply toward the front of the computer by approximately
one inch.
7 Lift the power supply up and out of the computer.

Replacing the Power Supply in the Mini Tower Computer

NOTE:
This procedure assumes that you have completed the removal procedure
first.
1 Slide the power supply into place at the back of the computer chassis.
104
Power Supply
1 2
2 power supply
4 AC power connector
3
4