Alignment Guide; Card-Edge Connector - Dell OptiPlex 360 Service Manual

NOTE:
For information on configuring the card, making internal connections,
or customizing it for your computer, see the documentation that came with the
card.
WARNING:
Some network adapters automatically start the computer when they
are connected to a network. To guard against electrical shock, be sure to unplug
your computer from its electrical outlet before installing any cards.
7 If you are installing the card into the PCI Express x16 card connector,
position the card so that the securing slot is aligned with the securing tab,
and gently pull the securing tab.
8 Place the card in the connector and press down firmly. Ensure that the card
is fully seated in the slot.
2
1
1

alignment guide

3

card-edge connector

9 Before you lower the card retention mechanism, ensure:
• The tops of all cards and filler brackets are flush with the alignment
guide.
• The notch the top of the card or filler bracket fits around the
alignment guide.
3
4
2 card
4 card connector
33
Cards