Installing Or Replacing A Card In The Optional Riser-Card Cage - Dell OptiPlex 360 Service Manual

Ensure that the riser-card connectors are fully seated in the connectors
b
on the system board.
Rotate the riser-card cage handle to the down position.
c
Installing or Replacing a Card in the Optional
Riser-Card Cage
NOTE:
The riser-card cage is an option for the desktop computer only.
1 Follow the procedure in "Before Working on Your Computer" on page 9.
2 Remove the computer cover (see "Removing the Desktop Computer
Cover" on page 21).
3 Remove the riser-card cage:
Disconnect any cables connected to cards through the back panel
a
openings.
Rotate the riser-card cage handle up and gently pull on the handle to
b
lift the riser-card cage up and away from the computer.
1 riser-card cage
3 riser cards (2)
52
Cards
2 handle
1
2
3