Selecting A Station (Manually Or Automatically); Selecting Preset Stations; How To Play Cds; Switching Disc Modes - Eclipse CD5425 Owner's Manual

[ PRESET CH

Selecting a station (manually or automatically)

A short press of the button will allow manual station tuning. Pressing
for more than one second will start automatic tuning.

Selecting preset stations

A total of six stations may be selected (preset tuning) out of those
already set in memory through the main unit. (Refer to "Manually
setting stations into memory" on page 64.)

How to play CDs

Switching disc modes

[BAND] button
] buttons
Press the [ TUNE•SEEK
[ ] button: Tunes to higher frequency stations.
[ ] button: Tunes to lower frequency stations.
Press the [ PRESET CH
[ ] button: Select the next higher number preset button.
[ ] button: Select the next lower number preset button.
Press the [DISC] button.
The disc mode is activated.
Press the [BAND] or [DISC] button.
When one or two CD changers are connected, press the
[BAND] or [DISC] button to change modes from CD player ➔
CD changer 1 ➔ CD changer 2.
The indicator will skip a changer or player that has no discs
loaded.
How to use an optional remote control
[DISC] button
[ TUNE · SEEK
] button.
] button.
79
] buttons