Removing The Battery Latch Assembly; Replacing The Battery Latch Assembly - Dell Studio 1535 Service Manual

Back to Contents Page
Battery Latch Assembly
Dell™ Studio 1535/1536 Service Manual

Removing the Battery Latch Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in Before You
2. Remove the base cover (see
3. Remove all memory modules (see
4. Remove the hard drive (see
5. Remove Mini-Card (see Removing the
6. Remove the processor thermal-cooling assembly (see
7. Remove the processor (see
8. Remove the center control cover (see
9. Remove the keyboard (see
10. Remove the display assembly (see
11. Remove the palm rest (see
12. Remove the optical drive (see
13. Remove the system board (see
14. Remove the latch spring.
NOTICE: Before you remove the latch button, observe the orientation of the latch to ensure proper installation when the latch is replaced.
15. Remove the screw from the battery latch and take the latch out from the computer base.
1 screw 2 spring
3 battery latch assembly

Replacing the Battery Latch Assembly

Begin.
Removing the Base Cover).
Removing Memory Module(s)).
Removing the Hard Drive).
Mini-Card).
Removing the Processor Thermal-Cooling
Removing the Processor Module).
Removing the Center Control
Removing the Keyboard).
Removing the Display Assembly).
Removing the Palm Rest).
Removing the Optical Drive).
Removing the System Board Assembly).
Assembly).
Cover).