Replacing The Optical Drive; Removing The Optical Drive Interposer - Dell Studio 1535 Service Manual

Back to Contents Page
Optical Drive
Dell™ Studio 1535/1536 Service Manual
Removing the Optical Drive
1. Follow the procedures in Before You
2. Remove the palm rest (see
3. Remove the three screws on the optical drive and take out the optical drive from the bay.
1 optical drive

Replacing the Optical Drive

1. Connect the optical drive connector to the system board.
2. Replace and tighten the three screws on the optical drive.
3. Replace the palm rest (see

Removing the Optical Drive Interposer

1. Follow the procedures in Before You
2. Remove the palm rest (see
3. Remove the three screws on the optical drive and take out the optical drive from the bay.
4. Pull out the optical drive interposer to remove it.
Begin.
Removing the Palm Rest).
3 screws (3)
Replacing the Palm Rest).
Begin.
Removing the Palm Rest).