Replacing The Display Panel - Dell Latitiude E6500 Service Manual
Hide thumbs
Also See for Latitiude E6500:
- Technical manual (85 pages) ,
- Setup and quick reference manual (72 pages) ,
- Reviewer's manual (50 pages)
Table of Contents
Advertisement
1 M2.5 x 5-mm screws (4) 2 display panel
3 display cover
4 inverter backlight cable
1. Disconnect the inverter backlight cable from the inverter.
CAUTION:
Be careful not to damage the display with the hinges and cables on the display cover.
2. Lift the display panel out of the display cover and lay the display panel flat on your workspace.
3. Disconnect the display cable and press the release tabs to remove the cable.
4. Remove the display panel brackets, if needed (see
Removing the LED Display Panel
1 M2.5 x 5-mm screws (4) 2 display panel
3 display cover
CAUTION:
Be careful not to damage the display with the hinges and cables on the display cover.
1. Lift the display panel out of the display cover and lay the display panel flat on your workspace.
2. Pull the pull-tab to disconnect the display cable.
Replacing the Display Panel
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.
Removing the Display Panel
Brackets).
Advertisement
Table of Contents
