1
DC power connector
Replacing the Power Module
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.
1. Position the DC power cable in the base assembly, aligning the guides on the connector sides with the base.
2. Connect the DC power cable to the system board (see illustration in
3. Replace the system board (see
4. Replace the card cage (see
5. Replace the palm rest (see
6. Replace the right-speaker/fingerprint reader cover (see
7. Replace the processor thermal-cooling assembly (see
8. Replace the keyboard (see
9. Replace the LED cover (see
10. Replace the display assembly (see
11. Replace the hinge covers (see
12. Replace the optical drive (see
13. Replace the hard drive (see
14. Replace the bottom of the base assembly (see
Back to Contents Page
2
DC power cable
Replacing the System Board
Assembly).
Replacing the Card
Cage).
Replacing the Palm Rest
Assembly).
Replacing the Right-Speaker and Fingerprint Reader
Replacing the Processor Thermal-Cooling
Replacing the
Keyboard).
Replacing the LED
Cover).
Replacing the Display
Assembly).
Replacing the Hinge
Covers).
Replacing the Optical
Drive).
Replacing the Hard
Drive).
Replacing the Bottom of the Base
Removing the Power Module
for proper cable routing).
Assembly).
Assembly).
Cover).