Replacing the Right-Speaker and Fingerprint Reader Cover
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.
CAUTION:
If you are installing a new fingerprint reader/speaker cover assembly, remove the backing paper from the bottom of the cable.
1. If you have a fingerprint reader, connect the fingerprint reader cable. Press along the cable to seal the cable into the palm rest.
2. Snap the speaker/fingerprint reader cover into place
3. Turn the computer upside down, and tighten the two M2.5 x 5-mm captive screws.
4. Replace the keyboard (see
5. Replace the LED cover (see
6. Replace the optical drive (see
7. Replace the hard drive (see
8. Replace the battery (see
Replacing the
Back to Contents Page
Replacing the
Keyboard).
Replacing the LED
Cover).
Replacing the Optical
Drive).
Replacing the Hard
Drive)
Battery).