Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
MEAT PROBE JACK
Star Washer
Meat Probe Jack Wires
Refer to page 4-32 for the procedure for ac-
cessing the meat probe jack.
1.
Unplug oven or disconnect power.
2.
Set the ohmmeter to the R x 1 scale.
3.
Touch the ohmmeter test leads across
the wire connector terminals. The meter
should indicate approximately 78 Ω @ 60°F
(15.6°C).
WARNING
Electrical Shock Hazard
BLOWER MOTOR
Refer to page 4-33 for the procedure for ac-
cessing the blower motor.
1.
Unplug oven or disconnect power.
2.
Set the ohmmeter to the R x 1 scale.
3.
Touch the ohmmeter test leads across the
wire connector terminals. The meter should
indicate between 181 and 240 Ω.
5-10