Removing The Lower Hidden Bake Element - KitchenAid KEBS278SSS - 27" Double Wall Oven Technical Manual

REMOVING THE LOWER HIDDEN BAKE ELEMENT

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug oven or disconnect power.
2. Remove the oven from its mounting location
(see "Installation Information" in Section 2)
and pull it forward so that you can access
the top cover.
3. Remove the six screws from the top cover
and remove the cover.
Screws (3 of 6)
4. Remove the twelve screws from the lower
rear cover and remove the cover.
Lower Rear Cover
(12 Screws)
Top Cover
5. Disconnect the two red wires from the hid-
den bake element terminals.
6. Remove the four screws from the hidden
bake element cover.
Hidden Bake Element Cover Screws
Continued on the next page.
4-35
Red Wires