8.
Remove the three screws from the appli-
ance manager mounting bracket and slide
back to expose top air duct latch cover.
Screw
Screw
9.
Bend and break the two front tabs on the
top air duct latch assembly cover.
10. Using a pair of side-cutters, cut the two
front joins on the top air duct latch assembly
cover, then bend the top and bottom covers
up as far as they will go.
Top Air Duct
Top Latch Assembly Cover
Screw
Cut Here
11. Remove the two screws from the door latch
assembly, pull the latch assembly back to
remove the latches from the cutouts, and
then lift and pull it forward so that you can
access the wiring.
12. Disconnect the wires from the assembly
as follows:
Latch motor = yellow & white
Door switch = brown (C) & orange (N.O.)
Latch switch = tan (C) & blue (N.O.)
OR
BR
Door Switch
4-8
Door Latch
Assembly Screws
YL
WH
BU
Latch Motor
Latch Switch
TN