KitchenAid KEBS278SSS - 27" Double Wall Oven Technical Manual page 54

4. To remove the oven temperature sen-
sor:
a) Remove the screws from the sensor
bracket.
Temperature
Sensor Screws
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
b) Remove the oven from its mounting
location (see "Installation Information"
in Section 2) and pull it forward so that
you can access the top cover.
c) Remove the six screws from the top
cover and remove the cover.
Screws (3 of 6)
Top Cover
d) Remove the twelve screws from the low-
er rear cover and remove the cover.
Lower Rear Cover
e) Disconnect the sensor wire connector
from the wiring harness.
f) Push the sensor wire connector through
the oven liner hole from the rear of the
oven.
g) Pull the temperature sensor connector
out of the hole and remove the sensor.
Remove Temperature Sensor
4-28
(12 Screws)
Oven Liner Hole
Temperature Sensor
Connector