Replacing The Microprocessor Module; Reserve Battery - Dell Latitude C500 Series Service Manual
Hide thumbs
Also See for Latitude C500 Series:
- User manual (189 pages) ,
- System information manual (71 pages) ,
- Service manual (62 pages)
Table of Contents
Advertisement
Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual
NOTICE:
When removing the microprocessor module, pull the module straight up. Be careful not to bend the pins on
the microprocessor module.
4. Remove the microprocessor module.
NOTICE:
To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular to the
microprocessor when removing the cam screw (see
a. Use a small flat-head screwdriver and rotate the ZIF socket cam screw counter-clockwise 180 degrees to loosen
the ZIF socket.
The ZIF socket cam screw secures the microprocessor assembly to the system board assembly. Take note of the
arrow on the ZIF socket cam screw (see
NOTE:
Your system has a type I or type II ZIF
socket.
b. Use a microprocessor extraction tool to remove the microprocessor module.
Replacing the Microprocessor Module
NOTICE:
Seating the microprocessor module properly in the ZIF socket does not require
force.
NOTICE:
A microprocessor module that is not properly seated can result in an intermittent connection, or permanent
damage to the microprocessor and ZIF socket.
1. Align the pin-1 corner of the microprocessor module with the pin-1 corner of the microprocessor socket on the system
board and insert the microprocessor module.
NOTICE:
You must position the microprocessor module correctly in the ZIF socket to avoid permanent damage to the
module and the socket.
When the microprocessor module is correctly seated, all four corners are aligned to the same height. If one or more
corners of the module are higher than the others, the module is not seated correctly.
NOTICE:
Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam
screw and microprocessor (see
2. Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module to the system board
assembly.
3. Update the BIOS using a flash BIOS update program diskette or CD.
NOTE:
For instructions to update or flash the BIOS, see the Dell Portable Computer BIOS Update
Guide.
Reserve Battery
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...600/C500%20C600%20Service%20Manual/remove.htm (28 of 36)6/21/2004 1:22:14 AM
"Microprocessor
"Microprocessor
"Microprocessor
Modules").
Modules").
Modules").
Advertisement
Table of Contents
