Recommended Tools - Dell Latitude C500 Series Service Manual

Before You Begin : Dell Latitude C600/C500 Series Service Manual
NOTICE: To avoid damaging the system board, you must remove the main battery and
secondary battery (if present) before you service the computer.
10. Remove the primary battery from the battery bay and the secondary battery from the modular
bay, if a secondary battery is in use.
11. Remove any installed device in the modular bay.
12. To dissipate any static electricity while you work, use a wrist grounding strap or periodically
touch an unpainted metal surface.
13. Handle components and cards with care. Do not touch the components or contacts on a card.
Hold a card by it edges or by its metal mounting bracket. Hold a component such as a
microprocessor by its edges, not by its pins.

Recommended Tools

The procedures in this manual require the following tools:
#1 magnetized Phillips screwdriver
Small flat-blade screwdriver
Small plastic scribe
Microprocessor extractor
Flash BIOS update program diskette or CD (required only when upgrading the microprocessor
or replacing the reserve battery)
System Orientation
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...0C600/C500%20C600%20Service%20Manual/begin.htm (2 of 6)6/21/2004 1:22:07 AM