Replacing The Microprocessor Module - Dell Latitude V710 Service Manual

Hide thumbs Also See for Latitude V710:

Table of Contents

Microprocessor Module: Dell Latitude V710/V740 Service Manual

NOTICE:

To ensure maximum cooling for the microprocessor, do not touch the

heat transfer areas on the microprocessor thermal-cooling assembly. The oils in

your skin reduce the heat transfer capability of the thermal pads.

3. Remove the

NOTICE:

When removing the microprocessor module, pull the module straight

up. Be careful not to bend the pins on the microprocessor module.

4. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-

socket cam screw counterclockwise until it comes to the cam stop.

The ZIF-socket cam screw secures the microprocessor to the system board. Take

note of the arrow on the ZIF-socket cam screw.

5. Use a microprocessor extraction tool to remove the microprocessor module.

Replacing the Microprocessor Module

NOTICE:

Ensure that the cam lock is in the fully open position before seating

the microprocessor module. Seating the microprocessor module properly in the

ZIF socket does not require force.

NOTICE:

A microprocessor module that is not properly seated can result in an

intermittent connection, or permanent damage to the microprocessor and ZIF

socket.

1. Align the pin-1 corner of the microprocessor module with the pin-1 corner of the

ZIF socket, and insert the microprocessor module.

NOTE:

The pin-1 corner of the microprocessor module has a triangle that aligns

with the triangle on the pin-1 corner of the ZIF socket.

NOTICE:

You must position the microprocessor module correctly in the ZIF

socket to avoid permanent damage to the module and the socket.

file:///F|/Service%20Manuals/Dell/Latitude/v710-740/cpu.htm (3 of 4) [2/28/2004 8:22:17 AM]

microprocessor thermal-cooling

assembly.

Table of Contents

Latitude v740