Ricoh Aficio MP 4000B General Settings Manual page 206

5. Printer Features
Displays the list of print jobs stored in the machine.
• List Per User ID
Displays the list of the User ID who stored a file in the machine.
Memory Usage
You can select the amount of memory used in Font Priority or Frame Priority, according to paper size
or resolution.
The default setting is Frame Priority.
• Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This setting uses frame memory for high speed printing.
Duplex
5
You can select to have print on both sides of each page.
The default setting is Off.
Copies
You can specify the number of print sets. This setting is disabled if the number of pages to print has
been specified with the printer driver or another command.
The default setting is 1 copies.
The number of copies can be specified from 1 to 999 by increments of one.
Blank Page Print
You can select whether or not to print blank pages.
The default setting is On.
Pages that match one of the following conditions are identified as blank.
• There are no images.
• There are images but they are outside the printable area.
• There are only blank characters.
Edge Smoothing
You can set to smoothen the edges of printed characters.
The default setting is On.
If you print either photo or halftone graphic images, select "Off".
Toner Saving
You can save toner.
The default setting is Off.
204