Fcc Statement-Class A - 3M Wall Display Safety Manual

FCC STATEMENT—CLASS A
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Instructions to Users
Notice
EEC Statement
Video Signal Cables
Video Inputs
7
P R O D U C T A N D S A F E T Y I N F O R M A T I O N
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide a reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
This machine was tested against the 89/336/EEC (European Economic
Community) for EMC (Electro Magnetic Compatibility) and fulfills these
requirements.
Double shielded coaxial cables (FCC shield cable) must be used, and the
outer shield must be connected to the ground. If normal coaxial cables are
used, the cable must be enclosed in metal pipes or in a similar way to
reduce the interference noise radiation.
The input signal amplitude must not exceed the specified level.
(See Appendix for these levels.)
WA L L D I S P L AY
7