3M Wall Display Quick Start Manual

WA L L D I S P L AY W I T H I D E A B O A R D Q U I C K S T A R T G U I D E
STANDARD IDEABOARD KIT
Digital Marker Sleeves Software CD
Digital Eraser Digital Mouse Stylus
MARKER AND BATTERY ASSEMBLY
Replacement Batteries: Lithium Ion CR2032 (2 per marker/eraser)
"Wherever there's a great meeting, you'll find 3M."
WA L L D I S P L AY W I T H I D E A B O A R D - - H A R D W A R E
7 8 - 6 9 7 0 - 9 1 1 7 - 7
COPYBOARD
Dry-Erase Markers
Batteries (10)
1
Make sure the Wall Display is plugged in and that the
Master Power Switch is on.
• The On/Off Button does not need to be turned on.
• Use the digital markers to write on the board.
• A computer is not needed.
• A printer will need to be plugged into the
™
Use the digital eraser to erase any markings.
Printer port for the direct print option.
( P A G E 1 O F 2 )
For Technical Support
1-800-328-1371
On/Off Button
Printer Computer
(This row for Digital
Whiteboard option only)
2 Press the top button to print.
3 Press the bottom button to clear the
buffer and begin a new page.
www.3M.com/walldisplay
Innovation