Turning The Handset On And Off - Cisco SPA302D User Manual

Getting Started
Understanding Your Cisco SPA302D
NOTE
Cisco SPA302D Mobility Enhanced Cordless Handset User Guide
6 Options—Items displayed in this menu depend on the phone state. For
example, different options are displayed when a call is active than when
the phone is idle.
Options When the Handset is Idle
• Redial—Press to dial the last number called.
• Intercom—Press to call another Cisco SPA302D that is registered
to the same Cisco SPA232D. Choose the handset from a list and
press the center Select button.
• Parked Calls—Retrieve a parked call. See
page 18.
• Grp Pickup—Pick up a call ringing at another handset in a group
of phones. See
• Pickup—Pick up a call ringing at a specified extension. See
"Picking Up a Call" on page
• Keylock—Press to lock the phone. To unlock, press the center
Select button, and then press the asterisk key (*).
Options When There is an Active Call
• New Call—Put an active call on hold and create a new call.
• Hold—Put a call on hold. See
16.
• Transfer—Transfer the call. See
17.
• Conference—Create a conference call between you, the caller on
the active call and another caller. See
Conference Call" on page

Turning the Handset On and Off

To turn the handset off and on, press and hold the End Call button.
Placing the handset into the cradle automatically turns the handset on, even if it has
been shut off.
"Picking Up a Call" on page
18.
"Putting a Call on Hold" on page
"Transferring a Call" on page
18.
"Parking a Call" on
18.
"Placing a Three-Way
1
5