Choosing The Default Outgoing Line - Cisco SPA302D User Manual

Using Your Cisco SPA302D
Configuring Call Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA302D Mobility Enhanced Cordless Handset User Guide
To configure call forwarding:
Press the center Select button to view the available preferences.
Scroll to Call Settings and press the center Select button again.
Scroll to Call Forwarding and press the center Select button.
In one or more of the fields, enter the number to which you want to forward calls.
You can forward calls to a voice mailbox, another extension, or an outside line. If
forwarding calls to an outside line, be sure to enter any steering digits, access
codes, or area codes required to complete the call. Press the Delete key to
backspace.
• Forward All Dest—Forwards all incoming calls to the destination of the
entered number.
• Forward Busy Dest—Forwards incoming calls to the destination of the
entered number when your phone is busy.
• Forward No Ans Dest—Forwards incoming calls to the destination of the
entered number when you do not answer the phone.
Press Save.

Choosing the Default Outgoing Line

You can configure the outgoing line for calls made from the Cisco SPA302D. For
example, you can select one of the ten DECT Lines or the PSTN (phone) line as the
outgoing line. The default outgoing line is the first line chosen when an outgoing
call is made from the Cisco SPA302D.
To choose the default outgoing line:
Press the center Select button to view the available preferences.
Scroll to Call Settings and press the Select button again.
Select Outgoing Default Line.
Choose the line you want to set as the default and press the Select softkey.
2
25