Viewing The Line Status; Configuring Phone Settings - Cisco SPA302D User Manual

Using Your Cisco SPA302D

Configuring Phone Settings

NOTE
STEP 1
STEP 2
STEP 3
Configuring Phone Settings
Cisco SPA302D Mobility Enhanced Cordless Handset User Guide
You can choose the outgoing line on a per-call basis by pressing and holding the
Start Call button. A list of lines that can be selected for an outgoing call appears.

Viewing the Line Status

You can view the status of all DECT Lines and the PSTN line by doing the following:
Press the center Select button to view the available preferences.
Scroll to Call Settings and press the center Select button again.
Select Line Status. The lines and status are displayed:
• Not Ready—The SIP line is not registered.
• Ready—The SIP line is registered.
• In Use—The SIP line is in on a call.
• Busy—The maximum number of calls in use for a SIP line has been reached.
To reach the Settings menu, press the center Select button, scroll to Settings,
and press the Select button again.
In the Settings menu, press the arrow buttons to select the settings you want to
change and press the Select button. You can perform the following tasks or
configure the following options from the Settings menu:
• Handset Registration—See
SPA232D Mobility Enhanced ATA" section on page
• Network Settings
• SIP Settings
• Ringtones
• Tones
• Backlight Settings
"Registering the Handset to the Cisco
2
11.
26