Table of Contents
Advertisement
Programming
4. CHOOSE your speed dial route from the following list:
• PRESS line button to select outside line,
• DIAL
• DIAL
• PRESS INTERCOM button or dial
NOTE:
You may need a pause between numbers to compensate for differ-
ences in response time between your system and the host system (ask your
attendant about this). To store a pause, press HOLD, then continue dialing. If
your system is behind a host system that needs a hookflash to access a
feature, press TAP to store a hookflash, then continue dialing.
5. DIAL number (up to 16 digits long—include
needed).
6. PRESS TRNS/CNF to store the number.
7. REPEAT previous steps until all numbers are stored.
8. HANG UP to end.
As you program numbers, fill in the identification strips on your telephone as
well as this table.
1
2
3
4
5
36
to select prime line or last line used,
to
to select line group,
Personal Speed Dial Numbers
(Keypad Buttons)
6
7
8
9
0
Single Line Proprietary Telephone Station User's Guide
to select intercom.
and
if
GCA70-251
Advertisement
Table of Contents
