Call Parking - Comdial GCA70-25 Station User's Manual

Advanced Call Handling

Call Parking

Parking a Call
You can place a call on hold in the system so that someone can answer the call from
any station that does not have a line appearance for the call. You accomplish this by
placing the call in one of many park orbits, where the call remains until it is
answered.
To park a call in orbit,
1. While on the call, PRESS INTERCOM OR PRESS TRNS/CNF if
intercom call.
2. DIAL
3. DIAL code for park orbit (
10–99).
4. Remember the code for later use or make it known to those who
need to know it in order to retrieve the call.
To retrieve a call that was placed on hold in the system
(parked),
1. PRESS INTERCOM.
2. DIAL
3. DIAL code for orbit (
Handling Park Recalls
When a parked call times out of the system, it returns to your telephone in the form of
a park recall (you hear four short tone bursts at 12-second intervals).
To answer a park recall,
1. LIFT handset. The call will then connect to your station.
To place a park recall on hold at your station,
1. ANSWER/RETRIEVE call.
2. PRESS HOLD. If the call remains on hold for a period of time, it
will ring back to your telephone as a hold recall.
28
.
.
Single Line Proprietary Telephone Station User's Guide
to for orbit
to for orbit 10–99).
GCA70-251