Call Parking - Comdial GCA70-313 User Manual

Advanced Call Handling

Call Parking

Parking a Call
You can place a call on hold in the system so that someone can answer the call from
any station that does not have a line appearance for the call. You accomplish this by
placing the call in one of many park orbits, where the call remains until it is
answered.
To park a call in orbit,
1. While on the call, PRESS INTERCOM OR PRESS TRNS/CONF if
intercom call.
2. DIAL
3. DIAL code for park orbit (
10–99).
4. Remember the code for later use or make it known to those who
need to know it in order to retrieve the call.
To park a call using a programmed PARK button,
1. While on the call, PRESS the programmed PARK button (the
system places the call in a preselected park orbit and lights the
PARK light).
To retrieve a call that was placed on hold in the system
(parked),
1. PRESS INTERCOM.
2. DIAL
3. DIAL code for orbit (
OR PRESS programmed PARK button.
Handling Park Recalls
When a parked call times out of the system, it returns to your telephone in the form of
a park recall (you will hear four short tone bursts at 12-second intervals).
To answer a park recall,
1. PRESS line button. The call will then connect to your station.
40
.
.
to for orbit
to for orbit 10–99),
Non-LCD Station User's Guide
GCA70-313