YOUR DRYER, continued
for each load.
Turn the cycle selector knob in either direc-
tion to select the cycle desired. The icon for
that cycle will be illuminated and if the cycle
description feature is turned on, the cycle and
estimated cycle time are displayed on the User
Interface screen for 5 seconds. Press any key
to advance the User Interface to select set-
tings and options. See the "Cycle Selection"
section in this guide for descriptions of each
If no buttons are pressed, the User Interface
screen will automatically
advance after 5 sec-
onds and display the preset drying tempera-
ture, dryness level (Auto Dry) or drying time
(Time Dry), extended tumble time, and options
for the cycle selected will be displayed. See
the "Cycle Settings Chart" in this guide for set-
tings available for each cycle.
To change the settings, press the tamp, dry-
ness level (Auto Dry) or drying time (Time Dry)
buttons to scroll to the
desired settings. Press the scroll up or scroll
down buttons under options to scroll through
the options menu. Press the select button to
add or delete options. The estimated cycle
time will be displayed at the top of the screens.
As the Cycle Selector knob is turned, the
cycle and estimated cycle time are displayed
on the User Interface screen for 5 seconds.
Press any key to advance the User Interface
and select settings and options.
made to a cycle will be remem-
bered and recalled each time that cycle is
selected in the future.
To return to the factory default settings, select
RESET in set prefs under the options scroll
To customize and save up to 3 cycles in non-
custom mode plus 9 more cycles for custom
users, see save as favorite
MODE in the User Interface sections of this
DRYING TIME or
OPTIONS SCROLL & SELECT--