Sony XDS-PD1000 Operation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Recording Equipment
  5. XDSPD1000
  6. Operation manual

Sony XDS-PD1000 Operation Manual

Professional media station
Hide thumbs Also See for XDS-PD1000:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual , Operation & Installation Manual
PROFESSIONAL MEDIA STATION
XDS-PD1000
XDS-PD2000
OPERATION MANUAL
1st Edition (Revised 4)
[English]

Advertisement

Table of Contents
loading

Related Manuals for Sony XDS-PD1000

Summary of Contents for Sony XDS-PD1000

  • Page 1 PROFESSIONAL MEDIA STATION XDS-PD1000 XDS-PD2000 OPERATION MANUAL [English] 1st Edition (Revised 4)
  • Page 2 3. Internal air ambient temperature of the rack WARNING When this product is installed in a rack, please make sure To reduce the risk of fire or electric shock, that the internal air ambient temperature of the rack is within the specified limit of this product.
  • Page 3 (commercial and light industrial), E3 (urban outdoors), E4 Dette merket er plassert på oversiden av driverenheten. (controlled EMC environment, ex. TV studio). The manufacturer of this product is Sony Corporation, 1-7-1 CAUTION Konan, Minato-ku, Tokyo, 108-0075 Japan. The use of optical instruments with this product will increase eye hazard.

  • Page 4: Table Of Contents

    Supplying Power................31 Initial Setup ..................31 Front Panel Tilt Mechanism ............33 Connections and Settings ............34 Connections for Content Browser and non-Sony nonlinear editors..34 Connections for cut editing ..............35 Synchronization Reference Signals..........39 Setting System Frequency............40 Setting Time Data ................
  • Page 5 Write-protecting discs................49 Loading and unloading a disc .............. 49 Formatting a disc ................. 49 Handling Memory Cards ............... 50 About memory cards................50 Inserting/removing an SxS memory card ..........51 Switching between SxS memory cards..........52 Chapter 4 Recording, Playback and Copying Recording..................
  • Page 6 Selecting clips..................77 Searching with thumbnails ..............77 Playing a clip by thumbnail search............78 Setting clip flags .................. 78 Locking (write-protecting) clips............78 Deleting clips..................79 Copying clips..................79 Setting the index picture frame ............79 EDL Editing ..................80 What is EDL editing? ................
  • Page 7 Appendix Important Notes on Operation............ 129 About the LCD panel................. 129 Condensation ..................129 Precautions for products with built-in HDD........130 Periodic Maintenance..............131 Operating hours meter ............... 131 Troubleshooting ................132 Alarms....................132 Error messages................... 140 Specifications ................140 About DVB-ASI Input/Output (When the Optional PDBK-202 Is Used)..................

  • Page 8: Chapter 1 Overview

    It supports 8-channel audio recording in 24-bit 48 kHz Features uncompressed PCM recording format for high sound quality. 1) MPEG HD422 is a trademark of Sony Corporation. The XDS-PD1000/PD2000 is a full-HD (1920 × 1080 and 1280 × 720) hybrid media deck that can use an internal PD2000 storage, Professional Discs, and SxS memory cards as recording media.
  • Page 9 It also supports the XAVC codec (CLASS 100/50). 1) When Maintenance menu item M397 PORT CONFIGURATION is set to 1) MPEG HD and XAVC are registered trademarks of Sony Corporation. “VTR mode”. 2) SDI recording only supported for 35 Mbps, and playback only supported for 25 Mbps and 18 Mbps.
  • Page 10 High-speed searches with the shuttle/jog dial The system frequencies supported by this unit are divided into frame frequency groups, as shown in the following The shuttle/jog dial can be used to find scenes inside clips table. on the internal storage/Professional Discs, in the same way as the shuttle and jog dials on conventional VTRs.
  • Page 11 • System timecode input • Remote control - RS-422A (D-sub 9-pin) (2) (In addition to the Sony 9-pin VTR protocol, this unit supports the Video Disk Control Protocol (VDCP).) - Video remote (D-sub 9-pin) (1) - GPIO (D-sub 15-pin) (1)

  • Page 12: System Configurations

    System Configurations The figure below shows devices and media that can be • Satellite news gathering (SNG) system (see page 13) used with this unit. • Ingesting/editing system (see page 13) You can use this unit and these devices to configure the •...

  • Page 13: Satellite News Gathering (Sng) System

    Satellite news gathering (SNG) system The following figure shows an example of SNG system in which this unit is used as both server and backup recorder. On the satellite truck Computer (installed with Content Browser) DVB-ASI TS signal DVB-ASI This unit This unit TS signal SDI signal...

  • Page 14: Live Production System

    Live production system The following figure shows an example of sports relay or live recording system in which this unit is used as both editing feeder and backup recorder. Slow-motion/replay controller RS422 (VDCP) This unit Monitor Slow-motion/ replay video Live video (SID signal) SDI signal Camcorder Global Ethernet...

  • Page 15: Chapter 2 Names And Functions Of Parts

    Names and Functions of Parts Chapter Front Panel The names and symbols of buttons and knobs on the front Orange: Function when the button is operated with the panel are color coded according to function. SHIFT button held down. White: Function when the button or knob is operated Blue: Function related to thumbnail operations.

  • Page 16: Port And Media Selection Section

    c On/standby (1) button and indicator 1 Port and media selection section When the main power switch on the rear panel is in the on This unit has a recording port and a playback port. You can position, this switches the unit between the operating state control these ports independently by selecting one of them (the indicator is lit green) and the standby state (the with the REC/PB2 PORT or PB1 PORT button.

  • Page 17: Memory Card Slots

    d DISC button 3 Memory card slots This button selects a Professional Disc as the operation target media. 1 Memory card slots e MEMORY button 2 Eject buttons This button selects an SxS memory card as the operation target media. f Slot selection lamps These light to indicate the selected memory card slot.

  • Page 18: Display/Menu Control Section

    b VARIABLE (audio level adjustment selector) PB: Adjust the playback audio levels. The input audio switch levels are fixed at their preset values. This selects whether input audio levels or playback audio levels are adjusted by the CH-1/ALL CH and CH-2 to CH- Note 4 adjustment knobs for channels 1 to 4, or by the function It is not possible to adjust the audio levels of the recording...

  • Page 19: Copy Button

    6 Recording and playback control section to the unit. When pressed again, the setup menu or the Clip Menu disappears. 1 PREV button f PAGE/HOME button 2 PLAY button When pressed alone, functions as the PAGE button. When 3 NEXT button pressed together with the SHIFT button, functions as the HOME button.

  • Page 20: Jog/Shuttle Direction Indicators

    d Jog/shuttle direction indicators In VTR mode, you can monitor the input signal in E-E mode by pressing this button when in stop condition. To These show the playback direction in jog, shuttle, or return to the original image, press the STOP button. variable-speed mode.

  • Page 21: Display Screen

    Display screen Basic operation screen This unit supports “1-in/1-out mode” and “VTR mode” the operation mode. The following screen shows 1-in/1- operation. Parts of the display screen vary depending on out mode, as an example. 1 Function menu 2 Audio input display/audio level meters 3 System information 4 Media status display 5 Recording/playback format...

  • Page 22: System Information

    F Level bars: Display the audio recording or playback B Video input display: This displays the selected video levels of channels 1 to 8. The OVER indicators light input signal. when the audio level exceeds 0 dB. HD-SDI: HD-SDI video input SD-SDI: SD-SDI video input c System information SG: Test video signal from the internal signal...

  • Page 23: Recording/Playback Format

    In VTR mode Note The remaining capacity of recordable resource space is not Clip number/total number of clips the same as the remaining recording capacity. When there Clip name Duration is no available recording resource space is left on the disc, file writing may be disabled even with sufficient available storage remaining.

  • Page 24: Status Display Area

    E Time data type: Displays the type of time data D Copy icon: An icon representing the copy source and displayed in the time data display area. The type of copy destination light while a copy operation is being time data is selected with CNTR SEL on the HOME executed between media.
  • Page 25 A Superimposed information: Appears when CHAR SEL on the HOME page of the function menu is set to “ON”. B Sub-status information: Displayed when setup menu item 017 SUB STATUS DISPLAY SELECT is set to “Off” in the setup menu. When media is selected as the target object Internal: Internal storage Disc: Professional Disc...

  • Page 26: Rear Panel

    Rear Panel 2 DVB-ASI OUTPUT connector 3 HDMI OUTPUT connector 4 REF. VIDEO INPUT connectors 2 Timecode input/output section (see page 29) 1 PCIe expansion slot 5 Redundant power supply unit installation section 1 HD/SD-SDI signal input/output 3 Power supply section section (see page 27) (see page 29) qd COMPOSITE OUTPUT 1, MONI/2 connectors...

  • Page 27: Monitor Connector

    HOME page of the function menu is set to “ON”. port. Connect a controller that supports the VDCP 1) You can set E-E signal output at all times using setup menu item 156 protocol or the RS-422A Sony 9-pin VTR control MONITOR OUT SELECT to REC port. protocol.
  • Page 28 a HD/SD-SDI INPUT (HD-SDI/SD-SDI signal input) CHAR SEL on the HOME page of the function menu and connector (BNC type) with the setting for setup menu item 027 SD This inputs an HD-SDI or SD-SDI format video/audio CHARACTER. You can always disable to superimpose signal.

  • Page 29: Ground Terminal (U)

    the data independent of the setting for CHAR SEL with the Note setting for setup menu item 027. Before turning the main power off, always check to be sure 1) You can set E-E signal output at all times using setup menu item 156 that the on/standby indicator on the front panel is lit in red MONITOR OUT SELECT to REC port.
  • Page 30 5 Analog audio signal input/output 1) You can set E-E signal output at all times using setup menu item 156 MONITOR OUT SELECT to REC port. section See “Basic Operations of the Function Menu” (page 45) for more information about the MONITR L and MONITR 1 ANALOG AUDIO INPUT 1, 2 connectors R settings.

  • Page 31: Chapter 3 Preparations

    Preparations Chapter Supplying Power Initial Setup Connect the AC power input connector to an AC power This unit is shipped with the area of use, system frequency, source using the specified AC power cord. To supply and current date and time still unset. power, set the main power switch on the rear panel to on, Therefore, you need to make initial setup settings before and then press the on/standby (1) button on the front panel...
  • Page 32 Note The time zone is reset to the factory default when you execute the maintenance menu item M49: RESET ALL SETUP. You will need to set it again. The date and time are not reset. Turn the PUSH SET knob to select the area of use. Display UC (for regions outside Japan) or J (for Japan), and then press the SET function button (F5).

  • Page 33: Front Panel Tilt Mechanism

    Note Front Panel Tilt The angle cannot be fixed if you pull the front panel past Mechanism position 3 all the way out to the return position. To fix the front panel, return it to position 0 and then pull it out to the desired angle.

  • Page 34: Connections And Settings

    You can also access to this unit from a nonlinear editor that is not a Sony product via FTP/CIFS, and use this unit as a material server. For an overview and installation of Content Browser, access the Sony website closest to your area.

  • Page 35: Connections For Cut Editing

    Connections for cut editing The following figure shows a cut editing system When making the connections, also refer to the manuals comprising this unit as a player. provided with the equipment to be connected. When using an editing control unit BVE-700/700A The following figure shows a cut editing system unit as a recorder, and a BVE-700/700A as an editing...
  • Page 36 Setting of VTR constants When connecting an editing control unit (BVE-700/700A/ 2000) to use with this unit, set VTR constants as follows. System frequency VTR constant 59.94i/59.94P/29.97P 50i/50P/25P 23.98P a) XDS-PD1000: B1, XDS-PD2000: B2 Using the RM-280 Editing Controller The following figure shows a cut editing system The RM-280 can perform tasks, such as thumbnail comprising this unit as a player, an HDW-M2000/M2000P searches, because the required VTR constants have been...
  • Page 37 Settings on each unit Device Settings HDW-M2000/M2000P (recorder) • REMOTE 1 (9P) button: Lit • REF.VIDEO INPUT connector 75 Ω termination switch: OFF • Audio selection function switching button INPUT button: HDSDI • Function menu HOME >F1 (VID. IN): SDI •...
  • Page 38 Settings on each unit Device Settings HDW-M2000/M2000P (recorder) REMOTE 1 (9P) button: Unlit This unit (player) • Setup menu item 208 PROTOCOL FOR REMOTE(9P): VTR • REMOTE button (for playback port): Lit For details of HDW-M2000/M2000P settings, refer to the HDW-M2000/M2000P Operation Manual.

  • Page 39: Synchronization Reference Signals

    Synchronization Reference Signals The synchronization reference signal generator of this unit setting of OUT REF on the HOME page of the function synchronizes to a reference signal input to the REF. menu, and on the type of the selected input signal. Video VIDEO INPUT connector or to a video input signal.

  • Page 40: Setting System Frequency

    Setting System Setting Time Data Frequency Setting timecode This unit can record and play back video at the system There are the following four ways of recording timecode: frequencies of 1080/59.94i, 50i, 29.97P, 25P, and 23.98P Internal Preset mode: This records the output of the or 720/59.94P and 50P.
  • Page 41 Setting an initial timecode value To record timecode synchronized to the station’s reference time Press the CNTR SEL function button on the HOME On page P4 TC of the function menu, set TCG to “SYS”. page of the function menu, and select TC. This selects recording of timecode synchronized to a broadcast station reference timecode signal input to the Press the TCG SET function button (F3).

  • Page 42: Setting User Bits

    To check the synchronization to the external Superimposed Text signal Press the REC/PB2 PORT button to select the recording Information port. Check that the timecode value shown in the time data display coincides with the external timecode value. The video signal output from the following connectors on this unit contains superimposed text information, To record external timecode directly including timecode and alarm messages.
  • Page 43 a Type of time data Display Operation mode Display Meaning Block A Block B Counter data PREV xxx Cuing up to the first frame of the current clip. TC reader timecode F.FWD Fast forward search TC reader user bits data F.REV Fast reverse search TCR.
  • Page 44 • Do not store for long periods in locations which are Display Name Description dusty or exposed to air circulated by fans. Red condition The playback condition has • Do not store for long periods under high temperatures or deteriorated. There are no read in locations exposed to direct sunlight.

  • Page 45: Basic Operations Of The Function Menu

    To change the setting of a function menu Basic Operations of the item Use the function buttons. Function Menu To select the value of the setting item Press the function button to the left of each setting item to The function menu provides access to frequently used change the value of the item.

  • Page 46: P1 Input Page

    Item Setting Item Setting F5: MONITR R Selects the channel to monitor as the right F5: A3 INPUT Selects the audio input signal to assign to monitor channel. audio channel 3. CH1, CH2, CH3, CH4, CH5, CH6, CH7, SDI: Audio signal embedded into SDI signal ANALOG1: Input signal to the ANALOG CH1/2, CH3/4, CH5/6, CH7/8 (MIX) AUDIO INPUT 1 connector...

  • Page 47: P3 Audio Page

    P3 AUDIO page Item Setting F2: PRST/RGN Selects the following for the internal Item Setting timecode generator. F1: A5 VOL Sets the volume of audio channel 5. PRESET: Presets an initial value for the The volume can be adjusted within the timecode generated by the internal range from –200 to 0 to +200 (–∞...

  • Page 48: Handling Discs

    • PFD128QLW (capacity 128 GB) item 319 PREREAD SELECT. 1) Professional Disc is a trademark of Sony Corporation. a) Displayed when maintenance menu item M397 PORT CONFIGURATION is set to “VTR Mode.” b) The target operation mode is set using setup menu item 108 AUTO EE Notes SELECT.

  • Page 49: Notes On Handling

    You can also write protect individual clips. For details, see Notes on handling “Locking (write-protecting) clips” (page 78). Handling The Professional Disc is housed in a cartridge, and is Loading and unloading a disc designed to allow handling free of risk from dust or fingerprints.

  • Page 50: Handling Memory Cards

    Use the following Sony memory cards with this unit. SxS PRO+ Memory card operations supported by this • SBP-64B (64 GB) unit •...

  • Page 51: Inserting/Removing An Sxs Memory Card

    • Carry and store SxS memory cards in their cases, and lock the cases securely. MEMORY ACCESS A/B lamps • Guard against accidents and inadvertent data loss by backing up the data stored on SxS memory cards. Sony MEMORY button Eject buttons cannot be responsible for any consequences of damage to or loss of data stored on SxS memory cards.

  • Page 52: Switching Between Sxs Memory Cards

    Press the button once to release the lock Press the eject button again to remove the card. Note Data are not guaranteed if the power is turned off or a memory card is removed while the card is being accessed. All data on the card may be destroyed.

  • Page 53: Chapter 4 Recording, Playback And Copying

    Recording, Playback and Copying Chapter Simultaneous recording Recording Records simultaneously to internal storage and Professional Disc, or internal storage and SxS memory card. This section describes video and audio recording on the Note unit. Simultaneous recording is disabled when maintenance See page 45 “Basic Operations of the Function Menu”...
  • Page 54 Select the media. When the maximum recordable number is reached, no further recording is possible. (The message “MAX # For recording to the internal storage: Press the Clips” appears in the status display area.) INTERNAL button. • This unit can record video input signals that are not For recording to Professional Disc: Press the DISC synchronized to a reference signal.

  • Page 55: Mixed Recording Of Clips In Different Formats On The Same Disc

    SxS memory card operation during simultaneous level indications on the audio level meters do not exceed recording 0 dB for a maximum volume. • If the SxS memory card is in an unrecordable state, pressing the REC button and PLAY button To set shot marks on the frame being simultaneously in step 3 displays a message, and recorded when recording operation is...

  • Page 56: Linear Editing

    Frame frequency System frequency Linear Editing 50 Hz Note 23.98 Hz 23.98P For linear editing, install the optional XDBK-105 and set the unit to VTR mode. To configure VTR mode, set Notes maintenance menu item M397 PORT CONFIGURATION • When the unit is in a mode that calls for playback across to “VTR mode”.

  • Page 57: Connections

    Item Setting Note Audio/Non-audio To perform insert editing of non-audio Editing of the MPEG HD420 format is not supported. (data) (data), set maintenance menu item M37: AUDIO CONFIG >M372: NON- AUDIO INPUT to “data”. Editable video and audio signals Notes This unit supports editing of the following signals on video •...

  • Page 58: Editing Operations

    For preread editing, set “PREREAD” on page P5 OTHER Editing operations of the function menu to ON (see page 48). Notes • When the IN and OUT points are not set in the same clip, Audio source insert editing is performed only for the clip containing the IN point.

  • Page 59: Playback

    Make the necessary connections for preread editing. Playback After selecting the desired insert editing mode, carry out preread editing. This section describes playback of video and audio on the When preread editing is completed, disconnect the unit. connections. Before starting playback, make the following settings and Set PREREAD on page P5 OTHER of the function adjustments.

  • Page 60: Repeat Playback Function

    The clip playback mode for Professional Disc and SxS To play back a clip, press the PREV button to move to the memory card is continuous playback mode only. start frame of any clip or press the PREV button with the PLAY button held down to move to any position.

  • Page 61: Selecting A Clip Or An Edl

    Do one of the following to select the clip/EDL that you Notes want to play. • Clips and EDLs on Professional Disc or SxS memory • Turn the PUSH SET knob. cards cannot be played in this mode. • Press the arrow buttons. •...
  • Page 62 Playback in jog mode Playback in shuttle mode In jog mode, you can control the speed of playback by the In shuttle mode, you can control the speed of playback by speed of turning the shuttle/jog dial. The playback speed the angular position of the shuttle/jog dial.

  • Page 63: Playback Operations Using Thumbnails

    Playback in variable-speed mode Playback operations using In variable-speed mode, you can control the speed of thumbnails playback in the range of –2 to +2 times normal speed. To carry out playback in variable-speed mode, select a clip Playback operations that you can perform with thumbnails (see page 61) or an EDL, and then proceed as follows.

  • Page 64: Copying

    • Transcode copy Copying You can duplicate or copy a clip on copy source media by changing the video format of the clip (see page 69). Example: An HQ1920-format clip recorded on SxS memory card (FAT format) can be converted to HD422 Overview format and copied to the Clip folder on Professional Disc.
  • Page 65 Functions varying with recording media The copy functions available on this unit vary with a combination of recording media as shown below. Copy destination Internal SxS memory Professional Disc storage card Clip folder UserData >XDROOT UserData >BPAV Copy source folder folder Internal storage N, P, C, T, TP N, P, C...
  • Page 66 To select several continuous clips Press the DEST function button (F2) and select the Move the cursor to the start or end of the clips that you copy destination media. want to select, and then proceed as described above DISC: Clip folder on the Professional Disc while holding down the SHIFT button.

  • Page 67: Professional Disc

    Copying clips to a Professional Disc/SxS is displayed to confirm whether you wish to replace the disc and continue the copying or to stop the copying. If you memory card then insert a recordable disc, copying to the inserted disc To copy clips on an SxS memory card to a starts from the position where the copying to the previous Professional Disc...

  • Page 68: Chase Copy

    Cue up to the frame where you want to set an OUT It is also possible to perform chase copy by carrying out point. the simultaneous recording operation. For the simultaneous recording, see page 53. Press the PUSH SET knob while holding down the , button.

  • Page 69: Transcode Copy

    Transcode copy Handling of Internal You can duplicate or copy a clip on copy source media by Storage/Professional changing the video/audio format of the clip. During the transcode copy operation, playback of the copy source clip Disc When Recording and recording of the copy are performed simultaneously. Does Not End Normally It is possible to perform transcode copy of only the specified part of a clip in the same way as the normal copy...

  • Page 70: Chapter 5 Operations In Clip List Screens

    Operations in Clip List Screens Chapter Overview Use clip list screens to search for scenes, play scenes found You can switch between the details view and the by searching, select clips to copy, and perform other thumbnails view of clip list screens. operations related to clips.

  • Page 71: Information And Controls In Clip List Screens

    folder under the Disc folder containing the clips you want Information and controls in clip list to display in a list. screens The appearance of the UserData icon changes as follows, depending on the currently selected folder. Note Currently selected folder Icon 59.94P/50P clips in 4K or HD material are not displayed in Clip folder (when UserData folder does...

  • Page 72: Details View

    i Duration e Thumbnail Displays the duration (recording time) of the selected clip. Displays the thumbnail of the selected clip (or the EDL When multiple clips are selected, displays the total icon when an EDL is selected). recording time of the selected clips. For details, see “Thumbnail display items”...

  • Page 73: Expand Thumbnail Screen

    c Clip flag icon TC/DUR: Timecode of the first frame/Recording time Created: Date and time of creation Displays the corresponding icon when a clip flag (OK/NG/ Modified: Date and time of most recent modification KP(KEEP)) is set in the clip (see page 78). Rec Device: Name of device that created the clip (product d S mark number)

  • Page 74: Chapter Thumbnail Screen

    On how to display the chapter thumbnail screen, see “To search through a clip in the chapter thumbnail screen” (page 77). Rec Start essence marks are set automatically at the start of recording, but shot marks can be set at any scene during recording or playback.

  • Page 75: Clip Menu

    g Duration Item Sub-item Function Displays the time from the first frame of the selected Finalize Disc – Finalizes a write-once chapter to the first frame of the next chapter. type Professional Disc (when the currently h Scrollbar selected media is “disc”).

  • Page 76: Clip F Menu

    P2 OTHER page Clip F Menu Professional Discs and SxS memory cards inserted in this unit cannot be displayed or operated on the unit while there The clip list screens provide the Clip F Menu, which can is a remote connection using FTP/CIFS from an external be accessed directly with function buttons.

  • Page 77: Clip Operations

    efficient way to review the selected clip and search for Clip Operations target scenes. You can specify 12, 144, or 1728 divisions. Note The following operations are not available for clips recorded on SxS memory cards (FAT/exFAT format). • Set clip flags In the clip thumbnail screen, select the thumbnail of •...

  • Page 78: Playing A Clip By Thumbnail Search

    To play the clip See page 74 for more information about chapter thumbnail screen. Select the clip you have found, and then press the PLAY button. In the clip thumbnail screen, select the thumbnail of a clip or the icon of an EDL with chapters set. Setting clip flags The S mark (see page 73) appears on the thumbnails of clips with chapters set.

  • Page 79: Deleting Clips

    To lock clips Place the unit in standby off mode to delete clips in VTR mode. To switch to standby-off mode, press and hold the SHIFT button and then press the STOP button. The In a clip list screen, select the clips that you want to STANDBY indicator turns off after switching to standby- lock (multiple selections possible).

  • Page 80: Edl Editing

    Press the STOP button at the frame you want to be the EDL Editing index picture frame, to obtain a still frame display. Display the page P5 OTHER of the function menu, and press the INDEX function button (F1). What is EDL editing? A confirmation box appears asking you whether to set the frame of the still image as the index picture frame.

  • Page 81: Creating And Editing Edls

    Create EDLs: Use the CREATE NEW EDL command to Clips on media create an EDL containing the selected clips. Add sub clips: Use the ADD TO CURT.EDL command Clip 1 Clip 3 Clip 4 to add the clips you want to use to an EDL. You can Clip 2 (C0002) (C0001) (C0003)
  • Page 82 Display the P1 EDL page of the Clip F menu and press the SET CURT.EDL (F1) button. The selected EDL becomes the current EDL. When the current EDL is specified, the current EDL icon appears in the status display area. Adding in clip list screens See page 70 for information about screen operations.
  • Page 83 To play an EDL Note When the internal storage playback mode is set to clip mode, only the selected sub clip can be played. In the chapter thumbnail screen, select the thumbnail for the sub clip you want to start playing. IN indicator To start playing from the first frame of the EDL OUT indicator...

  • Page 84: Media Operations

    For UserData>XDROOT folder or Media Operations UserData>BPAV folder on a Professional Disc Checking the media information In a clip list screen, press the MENU button to display the Clip menu. Select “Media Properties”, and then press the PUSH SET knob. The media properties screen for the selected media Media: DISC/XDROOT or DISC/BPAV appears.

  • Page 85: Professional Disc Operations

    Select “disc” as media. Professional Disc operations Switch the display to the clip list screen. The Clip Menu allows you to format (initialize) and finalize a Professional Disc. Display the Clip Menu. Formatting (initializing) discs Select “Finalize Disc” and press the PUSH SET knob. You can format recorded discs.

  • Page 86: Sxs Memory Card Operations

    Select Update/Restore Media, then press the PUSH To execute formatting, select “OK”, and then press the SET knob. PUSH SET knob. A confirmation dialog prompting whether or not to The formatting starts, and the “Format Executing…” execute repairs appears. message appears. To execute repairs, select “OK”...

  • Page 87: Disconnecting Remote Connection To Media

    To permit remote connection To execute repairs, select “OK” and press the PUSH SET knob. After remote connection is disconnected, perform the procedure above again to permit reconnection from an The repairs begin, and an “Update/Restore external device. Executing...” message appears. The repair process cannot be interrupted.

  • Page 88: Chapter 6 File Operations

    File Operations Chapter Overview A remote computer can be connected to this unit and used to operate on recorded data which has been saved in data files, such as video and audio data files. To perform file operations, use either of the following methods to interconnect this unit and a computer.

  • Page 89: File Operation Restrictions

    File operation restrictions This section explains which operations are possible on Note files stored in each directory. File names are not case-sensitive. “Read” and “write” are defined as follows. Read: Read data sequentially from the start to the end of the file.
  • Page 90 Edit directory File name Content Operations Read Write Rename Create Delete E01.SMI EDL file M01.XML Metadata file generated automatically when E01.SMI file is created. Other files Files other than the above – – – a) The unit can handle files with user-defined names in the “*” part. e) When an *E01.SMI file is deleted, an *M01.XML file with the same name b) Only files which can be written by XDS devices in the “*”...

  • Page 91: Clip Directory

    • The directories in the DISC directory (Clip, Edit, Sub, General, and UserData) cannot be deleted or renamed. • When connected by CIFS, only reading or partial reading of the DISC directory and subdirectories is supported. Clip directory File name Content Operations Read/Partial read Write/Partial write Rename Create Delete...

  • Page 92: General Directory

    Sub directory File name Content Operations Read/Partial read Write/Partial write Rename Create Delete Proxy AV data (MXF) file generated S01.MXF automatically when a C*.MXF file is created. *: 0001 to 9999 Other files Files other than the above – – –...

  • Page 93: Ftp File Operations

    This section explains how to use the command prompt. For FTP File Operations more information about using FTP client software, refer to the documentation of the FTP client software on your system. File operations between this unit and a remote computer To log in can be carried out by the File Transfer Protocol (called “FTP”...
  • Page 94 TYPE Notes Specifies the type of data to be transferred. • To execute FTP commands, you must install application Command syntax: TYPE <SP> <type-code (options software such as Content Browser on your computer. delimited by <SP>)> <CRLF> • The commands supported by application software vary. •...
  • Page 95 The following data is transferred, depending on whether Notes <path-name> specifies a directory or file. • For *.MXF files or *E01.SMI files, the UMID of the • Directory specified: A list of the files in the specified copy source file is not saved. However, it is saved if an directory •...
  • Page 96 - CODEC type Moves to a directory as follows, depending on whether a - Frame rate directory is specified with <path-name>. - Number of audio channels • Directory specified: To the specified directory - Duration • No specification: To the root directory - UMID Input example: CWD Clip •...
  • Page 97 Notes Notes • You cannot specify such section that exceeds the file • This command remains in effect until a STOR command size. is executed, or (if no STOR command is executed) until • If the file name character string contains one or more the FTP connection is terminated.

  • Page 98: Recording Continuous Timecode With Ftp Connection

    Recording Continuous CIFS File Operations Timecode with FTP You can perform file operations using the Common Connection Internet File System (CIFS) between this unit and the computer. When you are connected to the unit by FTP, you can create Preparations new clips with timecode that is continuous with the timecode of the last frame of the last clip on the media.

  • Page 99: Chapter 7 Menus

    Menus Chapter Menu System Setup Menu Configuration The setup menu system of this unit comprises the basic setup menu and extended setup menu. The settings for this unit use the following menus. Basic menu Setup menu This menu is used to make settings relating, for example, The setup menu system of this unit comprises the basic to the following.

  • Page 100: Items In The Basic Menu

    Item group Function Refer to Item group Function Refer to Items Settings relating to control page 106 Items Settings relating to the page 111 100 to 199 panels 650 to 699 metadata and UMID Items Settings relating to the remote page 108 Items Settings relating to video...
  • Page 101 Item number Item name Settings DISPLAY INFORMATION Determine the kind of text information to be output from the HD-SDI SELECT OUTPUT1 2 (SUPER), SD-SDI OUTPUT1 2 (SUPER), HD-SDI MONITOR/ OUTPUT2 2 (SUPER), SD-SDI MONITOR/OUTPUT2 2 (SUPER), or COMPOSITE OUTPUT MONI/2 connector. time data &...
  • Page 102 Item number Item name Settings SYSTEM FREQUENCY Specify whether to enable switching the system frequencies. SELECT MENU off: Do not enable switching the system frequencies. on: Enable switching the system frequencies. You can switch between the following frequencies. 1080/59.94i, 50i, 29.97P, 25P, 23.98P, 720/59.94P, 50P For details about switching the system frequencies, see page 40.

  • Page 103: Basic Menu Operations

    Item number Item name Settings STORED OWNERSHIP Specify whether to enable changing UMID ownership information settings (COUNTRY, ORGANIZATION and USER). off: Do not enable. on: Enable. See “Using UMID Data” (page 145) for more information about UMID. RECORDING FORMAT Set the recording format. HD422: HD422 HD420 HQ [420HQ]: HD420 HQ HD420 HQ1920 [HQ192]: HD420 HQ1920...
  • Page 104 To display a setup menu, press the MENU button. Current setting The currently selected menu item is displayed in reverse video. Currently selected item Group name for the currently selected item Press the PUSH SET knob or the SELECT function button (F2).

  • Page 105: Menu Bank Operations (Menu Items B01 To B13)

    To return all settings to their factory default sure to press the SAVE function button (F5) after making the settings. settings Press the MENU button to display the setup menu. To return menu settings to their factory default settings Press the RESET button. After changing menu settings, use the following procedure The message “INITIALIZE ALL ITEMS TO to return the settings to their factory default settings...

  • Page 106: Items In The Extended Menu

    To save the current settings in a menu bank To recall settings saved in a menu bank Select a menu item from B11 “SAVE SETUP BANK- Select a menu item from B01 “RECALL SETUP 1” to B13 “SAVE SETUP BANK-3” using the PUSH BANK-1”...
  • Page 107 FTP/CIFS and handled on the network. Note When using a nonlinear editor that is not a Sony product, please contact the maker to confirm whether it is possible or not to receive clips output by the chase output function using MXF V1.3 format.
  • Page 108 Select the protocol used with a REMOTE (9P) connector, for each port. Sub-item #2 (PB) Select the protocol used with the playback port. VTR: Sony 9-pin VTR protocol VDCP: VDCP protocol Note When maintenance menu item M397 PORT CONFIGURATION is set to “VTR mode”, the protocol is set to “VTR”...
  • Page 109 Menu items in the 300s, relating to editing operations Item number Item name Settings ANALOG AUDIO EDIT PRESET Select methods for setting the edit presets of the digital audio channels REPLACE FOR CH1 CH1 to CH4 of this unit. Make these settings when using an editor (PVE- 500, BVE-600, etc.) or remote control unit without a function to control ANALOG AUDIO EDIT PRESET digital audio edit presets.
  • Page 110 Menu items in the 600s, relating to the timecode, metadata, and UMID Item number Item name Settings VITC POSITION In 59.94i/59.94P/ Select the line into which to insert VITC signals (SD output) SEL-1 29.97P mode 12H to 16H to 20H: Any line from line 12 through line 20. Notes •...
  • Page 111 Menu items in the 600s, relating to the timecode, metadata, and UMID Item number Item name Settings UPCONV EMBEDDED VITC Select the source of the VITC embedded into output HD-SDI signal when up converting during playback of an SD clip. VITC: Select the VITC of the SD clip.
  • Page 112 Menu items in the 600s, relating to the timecode, metadata, and UMID Item number Item name Settings METADATA ITEM OUT Specify whether to include the information from recorded VANC packets in data items in the DATA ITEM section of MXF files. off: Do not include VANC packet information in DATA ITEM.
  • Page 113 Menu items in the 700s, relating to video control Item number Item name Settings INTERNAL VIDEO SIGNAL Select the test signal to be output from the internal test signal generator. GENERATOR When INT SG on page P1 INPUT of the function menu is set to “ON”, the internal test signal generator operates to output the selected test signal.
  • Page 114 Menu items in the 700s, relating to video control Item number Item name Settings INPUT VIDEO BLANKING Switch blanking on or off for lines in the vertical blanking interval of input video signals. Lines can be specified individually. Y/C signals and odd/ even fields are blanked simultaneously.
  • Page 115 Menu items in the 700s, relating to video control Item number Item name Settings PB LEVEL (HD) Adjust the PB level of the high-definition video signal output from the HD-SDI OUTPUT or HDMI OUTPUT connectors. –2048 to 0 to 846 PR LEVEL (HD) Adjust the PR level of the high-definition video signal output from the HD-SDI OUTPUT or HDMI OUTPUT connectors.
  • Page 116 Menu items in the 800s, relating to audio control Item number Item name Settings SDI AUDIO OUTPUT SELECT Select the audio signals to assign to SDI audio output channels. Sub-item CH1/CH2 tr1/2: Tracks 1 and 2 assigned to audio output channels 1 and 2. tr3/4: Tracks 3 and 4 assigned to audio output channels 1 and 2.
  • Page 117 Menu items in the 900s, relating to digital process Item number Item name Settings Sets the parameters for DVB-ASI output, and specifies the number of the a) b) DVB-ASI SETTING program to receive when DVB-ASI signals are input. Sub-item I/O MODE Sets DVB-ASI input /output.
  • Page 118 Menu items in the 900s, relating to digital process Item number Item name Settings PID(VIDEO) Changes the VIDEO packet PID value for DVB-ASI output. 30 to 810 to 1FFE: Set PID value (as a hexadecimal value). You can set the value over the range from 30 to 1FFE in 1 units (or 20 units, when the SHIFT button is held down).
  • Page 119 Menu items in the 900s, relating to digital process Item number Item name Settings LEVEL DEPEND THRESHOLD Adjust the down-converter image enhancer. Set the luminance range for (DC) edge enhancement. 0 to 8 to FH H DETAIL FREQUENCY (DC) Adjust the down-converter image enhancer. Set the central frequency for edge enhancement.

  • Page 120: Extended Menu Operations

    Menu items in the 900s, relating to digital process Item number Item name Settings IMAGE ENHANCER (INPUT UP Set up the operation of the up converter image enhancer for SD input, separately from the settings for playback (menu items 950 to 959). CONVERTER) Sub-item pb: While SD signals are input, make the behavior of the image...
  • Page 121 The maintenance menu appears on the video monitor screen. Turn the PUSH SET knob to select “M4 SETUP MAINTENANCE”, then press the PUSH SET knob or the SELECT function button (F2). The sub-items of M4: SETUP MAINTENANCE appears. Turn the PUSH SET knob to select “M40 EXTENDED MENU”, then press the PUSH SET knob or the SELECT function button (F2).

  • Page 122: Maintenance Menu

    Maintenance Menu Items in the maintenance menu The following tables show the items in the maintenance • The underlined values are the factory defaults. menu. • The values in the “Setting” column are the values that Refer to the Maintenance Manual for information about appear in settings screens.
  • Page 123 M3: OTHERS: Other setting items Item Setting M37: AUDIO M370: HEAD ROOM Select the audio reference level (headroom). CONFIG –20dB, –18dB, –16dB, –12dB, EBUL Note EBUL can be selected only when the system frequency is 50i/25P. M371: DATA LEN Select the audio channel configuration for IMX recording. 16bit x 8ch [16x8]: 16-bit, 8-channel configuration 24bit x 4ch [24x4]: 24-bit, 4-channel configuration M372: NON-AUDIO...
  • Page 124 M3: OTHERS: Other setting items Item Setting IN 2 Set the command to be assigned to pin IN 2. PB-PLAY COMMAND [PLAY] IN 3 Set the command to be assigned to pin IN 3. PB-RECUE COMMAND [RECUE] IN 4 Set the command to be assigned to pin IN 4. OUT 1 Set the status to be assigned to pin OUT 1.
  • Page 125 M4: SETUP MAINTENANCE: Items relating to the setup menu Item Setting M48: AUTO RECALL Select whether to recall settings automatically from a menu bank when the system is powered on, and if so which menu bank to recall from. off: Do not recall settings from a menu bank. from BANK1 [Bank1]: Recall settings from menu bank 1.

  • Page 126: Maintenance Menu Operations

    M5: NETWORK: Items relating to network settings Item Setting M5F: RESET NET CONFIG Reset network settings to the factory defaults. Push the SAVE function button (F5): Reset. Push the MENU button: Return to the next highest menu level without executing the reset.
  • Page 127 Press the SAVE function button (F5). Press the PUSH SET knob. The message “NOW SAVING...” appears on the video The IP address appears, and the digit that can be monitor screen, while the new settings are saved in changed flashes. memory.
  • Page 128 Press the PUSH SET knob or use the V or v button to select a combination of communications speed and protocol. To return to the factory default setting Press the RESET button. Press the SAVE function button (F5). This returns to the NETWORK menu. In the NETWORK menu, press the SAVE function button (F5).

  • Page 129: Appendix

    In the event of operating problems If you should experience problems with the unit, contact Condensation your Sony service or sales representative. If you move the unit from a very cold place to a warm Use and storage locations place, or use it in a damp location, condensation may form on the optical pickup.

  • Page 130: Precautions For Products With Built-In Hdd

    HDD can occur. HDD replacement • When transporting the unit, use the specified packing Contact your Sony service or sales representative about material. When transporting on a dolly or similar, use a periodic replacement of the HDD.

  • Page 131: Periodic Maintenance

    Press the RETURN function button (F1) to return to the maintenance. setup menu. For periodic maintenance, contact your Sony service or Press the EXIT function button (F6) to return to the screen sales representative. that was displayed before you entered the setup menu.

  • Page 132: Troubleshooting

    Example alarm in video monitor screen When an alarm is displayed, remove the alarm cause by following the action to take. If the alarm display does not disappear, contact your Sony service or sales representative. When the unit is powered on...
  • Page 133 Alarm message in status Alarm message in video monitor screen Description/action display area SSD detect OPTIONAL SSD HAS BEEN DETECTED. An optional SSD has been detected. PLEASE CHECK AND SET Set the maintenance menu item D11: RAID. MAINTENANCE MENU ITEM D11. When a memory card is inserted Alarm message in status Alarm message in video monitor screen Description/action...
  • Page 134 Alarm message in status Alarm message in video monitor screen Description/action display area No Support! FORMAT NOT SUPPORTED. This appears when a disc recorded in an RECORDING AND PLAYBACK IS NOT unsupported recording format has been inserted. Use POSSIBLE. a disc that is supported by this unit. DISC frequency mismatch! RECORDING AND PLAYBACK IS NOT This appears when the system frequency setting of POSSIBLE.
  • Page 135 Alarm message in status Description/action display area MAX # Clips No more clips can be recorded because the maximum number of recorded clips has been reached. Delete unneeded clips. Media Full! Recording or copying is not possible because the internal storage is full. Delete unneeded clips.
  • Page 136 Alarm message in status Alarm message in video monitor screen Description/action display area Verify ERR! DISC ERROR DETECTED. The Verify function detected abnormality in signals recorded on the disc. Replace the disc. Disc Damage DISC CANNOT BE RECORDED TO. Use another disc. USE ANOTHER DISC FOR RECORDING.
  • Page 137 Alarm message in clip Description/action list screen Copy Running! A copy operation is being performed, so another copy operation is not allowed. Operation Failed! The target operation failed because of generation of an internal error. Not Supported Format. The format is not supported by this unit, so copy operation is impossible. Copy Aborted.
  • Page 138 Alarm message in status Alarm message in video monitor screen Description/action display area FAN(1/2) Error FAN(1/2) ERROR. Contact your Sony service or sales representative. FAN(1/2) Warning FAN(1/2) WARNING. Note The unit will not stop operating, but if you continue to DC Power Warning DC POWER STATUS IS NOT NORMAL.
  • Page 139 READING/WRITING HDD NUMBER (1/2/3). writing an HDD (1, 2, or 3). The HDD must be PLEASE CONTACT SERVICE. replaced. Contact your Sony service or sales representative. HDD(1/2/3) Fail HDD(1/2/3) FAIL. An HDD (1, 2, or 3) had malfunctioned. The HDD PLEASE CONTACT SERVICE.

  • Page 140: Error Messages

    Error messages Specifications Error codes appear in the status display area when an error (usually a hardware problem) occurs. In addition, both General error messages and error codes appear on the video monitor screen or on a PC monitor connected to the External dimensions (w/h/d, excluding projections) MONITOR connector.
  • Page 141 System Recording/playback format (baseband recording) Video/audio MPEG-2 422P@HL, 50 Mbps, 8 ch/ 24 bit/48 kHz MPEG-2 MP@HL, 35 Mbps/VBR, 4 ch/ 16 bit/48 kHz MPEG IMX, 50/30 Mbps, 4 ch/24 bit/ 48 kHz, 8 ch/16 bit/48 kHz DVCAM, 25 Mbps, 4 ch/16 bit/48 kHz XAVC, CLASS 100/50, 8 ch/24 bit/ 48 kHz (MPEG-4 AVC/H.264) Proxy video...
  • Page 142 Analog audio inputs Quantization 8 bits/sample 10 bits/sample ANALOG AUDIO INPUT 1, 2 Compression MPEG-2 422P@HL XLR 3-pin (2) female, +4 dBu, high XAVC impedance, balanced PD2000 When the optional XDBK-106 is installed. Digital audio inputs Composite outputs DIGITAL AUDIO (AES/EBU) IN 1/2, 3/4, 5/6, 7/8 Frequency response BNC type (4), channels 1/2, 3/4, 5/6, 7/8, 0.5 to 5.75 MHz, +0.5/–2.0 dB...
  • Page 143 XDS-PD2000: Two units of 256 GB SSD • Always make a test recording, and verify that it was Professional Disc drive recorded successfully. SONY WILL NOT BE LIABLE 1 drive FOR DAMAGES OF ANY KIND INCLUDING, BUT SxS memory card drives...

  • Page 144: About Dvb-Asi Input/Output (When The Optional Pdbk-202 Is Used)

    The clip name when recording DVB-ASI TS About DVB-ASI Input/ signals When DVB-ASI TS signals are fed from an XDS-1000/ Output (When the PD1000/PD2000 unit or a PDW-HR1 which is equipped Optional PDBK-202 Is with the PDBK-202 and recorded on this unit, clips to be recorded can be given the same name as that of clips being Used) fed.

  • Page 145: Using Umid Data

    Using UMID Data What is a UMID? Metadata is additional information recorded on media along with audio-visual data. It is used to bring greater A UMID (Unique Material Identifier) is a unique identifier efficiency to the flow of operations from material for audio-visual material defined by the acquisition through editing, and to make it easier to find SMPTE-330M-2004 standard.
  • Page 146 • Recording with UTC time. UTC (coordinated universal Use the PUSH SET knob, – or + function button (F3 or time) is used when recording the UMID. Use of a F4) to select characters to input at the selected universal time system enables uniform management of location.

  • Page 147: Ancillary Data

    When the user code is less than 4 bytes, enter the user code Ancillary Data at the beginning of the 4 bytes and fill the remainder of the string with the space character (20h). This user code is determined by the organization. The methods used depend on the organization.

  • Page 148: Ancillary Data In Mxf Files

    To record EIA-608-B standard closed caption Ancillary data in MXF files data in SDSDI line 21 signals after conversion to the EIA-708-B standard (when the optional XDBK- VANC ancillary data recorded from a HDSDI signal can 103 is installed) be inserted to an MXF file as an ANC Frame Element Set the following items.
  • Page 149 Standard functions Normal EIA-708/608 recording and playback In response to closed caption input data that complies with (page 147) or “To record EIA-608-B standard closed the EIA-708/608 standards, record, play, and output that caption data in HDSDI signals” (page 147). data with no changes.
  • Page 150 Recording and playback after EIA-608t708 conversion, and down convert playback In response to closed caption input data that complies with For details, see “To record EIA-608-B standard closed the EIA-608 standard, record, play and output that data caption data in SDSDI line 21 signals after conversion to after conversion to EIA-708 format.
  • Page 151 Up convert playback of SD clips containing closed caption data When you up convert and play SD clips, EIA-608 For details, see “To record EIA-608-B standard closed compliant closed caption data in the clips is converted to caption data in SDSDI line 21 signals after conversion to EIA-708 format, and then played and output according to the EIA-708-B standard (when the optional XDBK-103 is the EIA-708 standard.
  • Page 152 Playback and down convert playback of HD clips containing EIA-608 data only EIA-608 standard closed caption data recorded in HD clips For details, see “To record and playback EIA-708-B is played and output without conversion. By performing standard closed caption data in HDSDI signals” down convert playback, you can also play and output EIA- (page 147) or “To record EIA-608-B standard closed 608 standard closed caption data.

  • Page 153: Correspondence Between Setting Items Of The Hkdv-900 And Setup Menu Of This Unit

    Setting item of Menu item of this unit’s setup menu Correspondence between HKDV-900 DEPEND 938: LEVEL DEPEND THRESHOLD Setting Items of the (DC)/ 957: LEVEL DEPEND THRESHOLD HKDV-900 and Setup (UC) FREQUENCY 939: H DETAIL FREQUENCY (DC)/ Menu of This Unit 958: H DETAIL FREQUENCY (UC) H/V RATIO 940: H/V RATIO (DC)/...

  • Page 154: Trademarks And Licenses

    AND/OR WAS OBTAINED FROM A VIDEO To meet the requirements of the software copyright PROVIDER LICENSED BY MPEG LA TO PROVIDE holders, Sony is obligated to inform you of the content of MPEG-4 VIDEO. these licenses. For the content of these licenses, see “License1.pdf” in the NO LICENSE IS GRANTED OR SHALL BE IMPLIED “License”...

  • Page 155: Glossary

    A list of locations in the material devices can record non-audio as an Glossary recorded on a media, arranged in any input signal. order. 1) Dolby is a trademark of Dolby Laboratories. Non-drop-frame mode E-E mode A mode of advancing timecode AES/EBU Electric-to-Electric mode.
  • Page 156 minute, second and frame number. SMPTE timecode is applied to NTSC system, and EBU timecode to PAL and SECAM systems. UMID Unique Material Identifier. A standard (SMPTE-330M) for video and audio metadata. The Basic section of a UMID contains a globally unique number and a material number for the identification of recorded material.

  • Page 157: Index

    Clip F Menu 76 Index Clip list screens 70 Editing chapter thumbnail screen 74 control unit 35 details view 72 controller 36 expand thumbnail screen 73 EDL 80 thumbnails view 71 creating and editing 81 AC power input connector (-) 29 Clip Menu 75 previewing 81 Accessories...
  • Page 158 setup menu 99 REC button 19 MENU button 18 REC INHI indicator 20 HD/SD-SDI INPUT connector 28 Metadata 145 REC/PB2 PORT button 16 HD/SD-SDI signal input/output MONITOR connector 27 Recording 53 section 27 level adjustment 55 HDMI OUTPUT connector 26 mixed recording 55 HD-SDI MONITOR/OUTPUT2 1, 2 settings 53...
  • Page 159 Thumbnail search 77 chapter thumbnail screen 77 expand thumbnail screen 77 Tilt mechanism 33 TIME CODE IN/OUT2 connector 29 OUT1 connector 29 Time data display area 23 Timecode 40 input/output section 29 recording after setting initial value recording external timecode directly 42 recording synchronized to the station’s reference time...
  • Page 160 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...
  • Page 161 XDS-PD1000 Sony Corporation XDS-PD2000 (SYL) 4-284-731-05 (1) © 2011...

This manual is also suitable for:

Xds-pd2000

Table of Contents