Gathering Clips From Multiple Discs On One Disc - Sony PDWHR1 Operation Manual

Notes
• The image quality of clips is degraded if the copying
involves format conversion.
• If you copy a clip having a name that is 53 bytes or
longer twice, the clip name changes on the second
copy to a standard name in the format "C****"
(****: 0001 to 4999).
To copy after specifying a range in a clip
You can copy a specified range from a clip on an SxS
memory card to a Professional Disc. Use the following
procedure.
Note
The specified range must be within a single clip. It is not
possible to copy after specifying a range across multiple
clips.
1
Before starting, use items 013 and 031 in the
PDW-HR1 setup menu to set the number of system
lines, the system frequency, and the recording format
for clips at the copy destination.
Note
Copying is not possible if the copy source and HD/SD
Mode in the OTHERS menu of this board are set to
"HD" and setup item 031 in the PDW-HR1 setup
menu is set to an SD format (IMX50/40/30, DVCAM).
2
Execute steps 1 and 2 of "Backing up SxS memory
card clips by copying them to discs" (page 31).
3
Set BACKUP on the SxS page of the function menu to
"OFF".
4
Use the PLAY, PAUSE, and STOP buttons and the
shuttle/jog dial to play the clip, and set edit points in
the clip.
To set In or Out points
With the IN or OUT button held down, press the
ENTRY button.
To jump to In or Out points
With the IN or OUT button held down, press the
GOTO button.
To adjust the positions of In or Out points
With the IN or OUT button held down, press the
– TRIM or + TRIM button.
To delete In or Out points
With the IN or OUT button held down, press the
DELETE button.
To recall a deleted In point or Out point
Press the RECALL button with the IN button or OUT
button held down.
5
Press the CLIP COPY button.
The copy menu appears (see page 8).
To exit the copy menu
Press the RETURN button.
6
Turn the PUSH SET knob to select "TO
DISC(MXF)", and then press the PUSH SET knob.
A confirmation message appears asking whether you
want to execute the copy.
To cancel the copy
With "Cancel" selected, press the PUSH SET knob.
7
Turn the PUSH SET knob to select "Execute", and
then press the PUSH SET knob.
Copying of the specified range by dubbing processing
starts.
The copy is executed at normal speed, regardless of
whether it involves a format conversion. (If the
duration is 30 seconds, the copying takes 30 seconds.)
The index picture of the clip at the copying destination
becomes the first frame of the range specified in
step 4.
If the copy fails
You may be able to use a salvage function to restore
the clips at the copy destination.
See "Handling of discs when recording does not end
normally (salvage functions)" in Chapter 4 of the
PDW-HR1 Operation Manual for details about the
salvage functions.
Note
The image quality of copied clips is degraded.
Gathering clips from multiple discs
on one disc
You can gather clips from multiple discs and save them on
one disc. Use the following procedure.
Note
Clips of the following types cannot be copied.
• HD420SP clips
• HD420LP clips
• Clips recorded with the Slow & Quick Motion function
of the PDW-F800/700, with FRAME RATE set to 25P
33
Copy Operations