Thumbnail Menu (Udf Mode) - Sony PDWHR1 Operation Manual

Menu items Sub-item
Clip Auto Naming C****/Free
Title Prefix
Number Set
Update
Find Mode —
Rec Point —
Format Media(A)
Media
Media(B)

THUMBNAIL menu (UDF mode)

Menu items
Clip Properties
Set Index Picture
Settings All Reset
target
Yes
Text input Yes
0001 to 9999 Yes
Media (A)/ —
Media (B)
Clip/Clip&RST Yes
Fade/Cut —
Execute/Cancel —
Execute/Cancel —
Sub-item Function
— Displays detailed properties.
— Changes index pictures in the expand thumbnail screen or the
essence mark thumbnail screen.
Setup Data Function
Recall target
Yes When the file system is UDF mode, specifies the
naming format of MXF format clips and clip list
(specifies whether to allow use of files with user-
defined names).
C****: Standard format (****: 0001 to 4999. Do not
allow use of files with user-defined file names.)
Free: Free format. (Allow use of files with user-
defined file names.)
Yes When Auto Naming is set to "Free", specifies the
title part (4 to 46 alphanumeric characters) of clip
titles.
When the currently specified title is eight
characters or fewer in length, the entire title
appears. When the title is longer than eight
characters, the first seven characters appear and
a "···" symbol appears in place of the eighth
character.
Displays the Character Set screen (see page 38).
Note
Clip names that begin with a period (.) may not be
handled properly by the XDCAM EX Clip Browsing
Software and other applications. Avoid such
names.
— When Auto Naming is set to "Free", specifies the
initial value of the numeric part (four digits) of clip
names.
— Updates the management files on the media in the
selected slot (execute by selecting Execute).
Yes Specify the frame to be cued up when the PREV
or NEXT button is pressed.
Clip: The first frame of the clip
Clip&RST: The frame where a Rec Start essence
mark is set (if no essence mark is set, the first
frame of the clip)
— Specifies the method used to handle audio at
recording transition points of material recorded in
Clip Continuous Rec mode.
Recording transition points are clips (when Find
Mode is Clip) or Rec Start essence marks (when
Find Mode is Clip&RST).
Fade: Fade out and fade in
Cut: Cut edit
— Initializes the recording media in slot A (execute by
selecting Execute).
— Initializes the recording media in slot B (execute by
selecting Execute).
41
Setup Menu List