Thumbnail Screens - Sony PDWHR1 Operation Manual

Thumbnail Screens

A thumbnail screen appears if you press the
THUMBNAIL/ESSENCE MARK button when the
PDW-HR1 is in hybrid mode. Thumbnail screens display
lists of the clips stored on the selected recording media in
the form of index pictures.
You can select any clip (see page 22) in a thumbnail screen
and start playback of that clip (see page 22).
To switch recording media
If a thumbnail screen is displayed, press the
THUMBNAIL/ESSENCE MARK button to return to the
clip playback screen and make the settings shown in the
following table. However, you can switch between slots A
and B even when a thumbnail screen is still displayed.
Recording Selection method
media
MEMORY
or DISC
button
DISC(MXF) DISC
DISC(USER)
SLOT A MEMORY
SLOT B
Recording media selectable in hybrid mode
Notes
• When you first select DISC(USER) on a PDW-HR1
with this board installed, and then insert a disc with the
Write Inhibit tab in the recording disabled position, or a
disc with no free capacity, a message appears asking if
you want to restore the disc.
If this occurs, set the Write Inhibit tab to the recording
enabled position or free up space on the disc by deleting
unneeded clips.
• You cannot switch between slots A and B when
DISC(USER) is selected.
18
Thumbnail Screens
Thumbnail
screen
Function
description
menu SxS
(reference
page
page)
BACKUP: OFF Chapter 5 of
the PDW-HR1
Operation
Manual
BACKUP: ON Page 19
SLOT: A
SLOT: B