Converting Clip Lists To Mxf Clips - Sony PDWHR1 Operation Manual

or higher (in the case of 1080/25P format) or 30P or
higher (in the case of 1080/30P format). (Clip meeting
these criteria are displayed in clip thumbnail screen with
a "1080/2ch" indication.)
1
Insert a Professional Disc containing recorded clips
into the disc slot, and insert a writeable SxS memory
card with enough free capacity into a memory card
slot.
When two SxS memory cards are loaded
Press the SLOT button on the SxS page of the function
menu to select the copy destination card (A or B).
2
With the SHIFT button held down, press the EDIT/
HYBRID button.
The PDW-HR1 enters hybrid mode, and the
MEMORY button lights.
3
Set BACKUP on the SxS page of the function menu to
"OFF".
4
Press the DISC button.
The access target of the PDW-HR1 becomes the MXF
clip recording area managed by XDCAM devices.
5
Do one of the following.
• To copy in clip units, refer to steps 4 and 5 of
"Backing up SxS memory card clips by copying them
to discs" (page 31), and select the thumbnails of the
clips that you want to copy.
• To copy a specified range in a clip, refer to step 4 of
"To copy after specifying a range in a clip"
(page 33) and set edit points in the clip to be copied.
6
Press the CLIP COPY button.
The copy menu appears (see page 8).
To exit the copy menu
Press the RETURN button.
To switch the copy destination memory card
Press the SLOT button on the SxS page of the function
menu.
To cancel the copy
With "Cancel" selected, press the PUSH SET knob.
7
Turn the PUSH SET knob to select "OK", and then
press the PUSH SET knob.
Copying of the clip starts.
• If you execute a clip-unit copy, file copying of the
clip is executed at high speed (2.2 times normal
speed) with no degradation in image quality.
34
Copy Operations
• If you specified a range to copy, the range is copied
by dubbing processing at normal speed. (If the
duration is 30 seconds, the copying takes 30
seconds.)
If the copy fails
• If you executed a clip-unit copy (high-speed copy),
the clip is erased from the destination and cannot be
restored. Repeat the copy operation.
• If you copied a specified range (normal speed copy),
may be able to use a salvage function to restore the
clips at the copy destination.
See "Handling of discs when recording does not end
normally (salvage functions)" in Chapter 4 of the
PDW-HR1 Operation Manual for details about the
salvage functions.
Notes
• The image quality of clips that are copied by
specifying a range is degraded.
• Clips copied from the Clip directory on a
Professional Disc to an SxS memory card become
independent AV files. Shot marks cannot be added
to such files. If you want to add shot marks to such
clips, add them before copying them, or copy them
again to the Clip directory on a Professional Disc
and operate on the disc.
8
Exchange the disc and repeat steps 5 to 7.
9
After you have copied all of the clips that you need to
the SxS memory card, carry out an edit list editing
using the SxS memory card as the player.
Note
Edit list editing is not possible if you specify a range
that cannot be played seamlessly, for example because
neighboring clips have different formats.
For information about operations, refer to Chapter 6
"Edit List Editing" in the PDW-HR1 Operation
Manual.

Converting clip lists to MXF clips

You can convert a clip list stored on a disc to an MXF clip
by copying it to an SxS memory card. Use the following
procedure.
1
Insert Professional Disc containing a clip list into the
disc slot, and insert a writeable SxS memory card
enough empty capacity into a memory card slot.