Copying Sxs Memory Card Clips To Disc In Mxf Format - Sony PDWHR1 Operation Manual

5
Do one of the following to select the thumbnail of the
clip to copy.
• Turn the PUSH SET knob.
• Press the V/MARK1, v/MARK2, B, and b buttons.
To select a continuous range of thumbnails
Move the cursor to the first or last of the thumbnails in
the range that you want to select, and then do the above
operations with the SHIFT button held down.
6
Press the CLIP COPY button.
The copy menu appears (see page 8).
To exit the copy menu
Press the RETURN button.
7
Turn the PUSH SET knob to select "TO
DISC(USER)", and then press the PUSH SET knob.
A confirmation message appears asking whether you
want to execute the copy.
To cancel the copy
With "Cancel" selected, press the PUSH SET knob.
8
Turn the PUSH SET knob to select "Execute", and
then press the PUSH SET knob.
File copying of the clip starts.
Clips are copied at high speed (2.2 times normal
speed) with no degradation in image quality.
If the copy fails
Clips at the copy destination are erased and cannot be
restored. Repeat the copy operation.
9
When the copy ends, delete the clips from the SxS
memory card as required (see page 25).
Copying SxS memory card clips to
disc in MXF format
When the format of copy source clips is MP4/AVI, a
conversion to MXF format is performed during the copy.
To copy clips in different recording formats
Before starting, set item M390: MIXED REC in the
PDW-HR1 maintenance menu to "ENABLE".
Note
720/25P, 720/29.97P, and 720/23.98P MXF clips cannot
be copied.
32
Copy Operations
To copy in clip units
You can copy clips in clip units from an SxS memory card
to a Professional Disc. Use the following procedure.
1
Before starting, use items 013 and 031 in the
PDW-HR1 setup menu to set the number of system
lines, the system frequency, and the recording format
for clips at the copy destination. (For MXF clips, this
operation is not needed.)
Note
Copying is not possible if the copy source and HD/SD
Mode in the OTHERS menu of this board are set to
"HD" and setup item 031 in the PDW-HR1 setup
menu is set to an SD format (IMX50/40/30, DVCAM).
2
Execute steps 1 and 2 of "Backing up SxS memory
card clips by copying them to discs" (page 31).
3
Set BACKUP on the SxS page of the function menu to
"OFF".
4
Execute steps 4 and 5 of "Backing Up SxS memory
card clips by copying them to discs".
5
Press the CLIP COPY button.
The copy menu appears (see page 8).
To exit the copy menu
Press the RETURN button.
6
Turn the PUSH SET knob to select "TO
DISC(MXF)", and then press the PUSH SET knob.
A confirmation message appears asking whether you
want to execute the copy.
To cancel the copy
With "Cancel" selected, press the PUSH SET knob.
7
Turn the PUSH SET knob to select "Execute", and
then press the PUSH SET knob.
Copying of the clips starts.
If the copying involves a format conversion from
MP4/AVI clips, it is executed as normal speed
dubbing. (If the clip length is 30 seconds, the copying
takes 30 seconds.)
If the copy fails
You may be able to use a salvage function to restore
the clips at the copy destination.
See "Handling of discs when recording does not end
normally (salvage functions)" in Chapter 4 of the
PDW-HR1 Operation Manual for details about the
salvage functions.