To Display Thumbnail Screens - Sony PDWHR1 Operation Manual

To display thumbnail screens

This board allows you to display the thumbnail screens in
the following table, according to what you want to do.
Type Target
Clip thumbnail screen Clips that can be played in this
(normal thumbnail board's current operating mode
screen) (see page 20) (UDF/FAT, and HD/SD)
Expand thumbnail HD mode: The selected clip
screen (see page 26) divided into 12 blocks, each
beginning with the first frame of
the block
SD mode: Only for clips resulting
from a division of a file with a
size greater than 2 GB, the first
frames of the divided files
Essence mark The frames in a clip to which
thumbnail screen (see essence marks (Rec Start, Shot
page 27) Mark1, or Shot Mark2 essence
marks) have been added
Filtered clip thumbnail UDF mode: Clips to which clip
screen flags (OK/NG/KP/None) have
been added
FAT-HD mode: Clips to which OK
marks have been added
All clips thumbnail All clips, regardless of the current
screen operating mode (UDF/FAT, and HD/
SD) of this board
For information about THUMBNAIL menu operations, see
"Basic Setup Menu Operations" (page 37).
Purpose To display
Search for and play With the PDW-HR1 in hybrid mode, press
clips on the selected the THUMBNAIL/ESSENCE MARK
media. button.
To return to the original screen, press the
THUMBNAIL/ESSENCE MARK button
again.
Quickly cue up a In the clip thumbnail screen, select a clip
desired scene in a and then do one of the following.
long clip. • Press the EXPAND button.
• In the THUMBNAIL menu, select
Thumbnail View >Forward Expansion.
To return to the clip thumbnail screen,
press the RETURN button.
Display only clips to In the clip thumbnail screen, select a clip
which essence marks and then do one of the following.
have been added. • With the SHIFT button held down,
press the THUMBNAIL/ESSENCE
MARK button.
• In the THUMBNAIL menu, select
Thumbnail View >Essence Mark
Thumbnail.
To return to the clip thumbnail screen,
press the RETURN button.
Display only clips of In the clip thumbnail screen, do one of
the same type which the following.
have already been • In the THUMBNAIL menu, select Filter
marked as OK or not. Clips >OK/NG/KP/None (the desired
clip flag) (UDF mode)
• In the THUMBNAIL menu, select Filter
Clips (FAT-HD mode)
To return to the clip thumbnail screen,
press the RETURN button.
Display all clips on the In the clip thumbnail screen, select
selected media. Thumbnail View >All Clip Thumbnail from
the THUMBNAIL menu.
Note
Clips cannot be played
To return to the clip thumbnail screen,
from the all clips
press the RETURN button.
thumbnail screen.
19
Thumbnail Screens