Fujitsu PRIMERGY BX600 S2 Operating Manual page 75

Server Blades
Configuration Diagram for 4-way Server Blades
– Slots 3 and 4 are filled first.
– Next, slots 5 through 10 are filled in pairs in numerical order, followed by
slots 1 and 2.
1 2
5
Figure 32: Installation sequence for 4-way server blades
Configuration Diagram for a Mix of 2-way and 4-way Server Blades
– The 4-way server blades are fitted first, followed by the 4-way server blades
– Begin with a 4-way server blade in slots 3 and 4.
1 2
6
Figure 33: Installation sequence for three 2-way and three 4-way server blades
I
2-way server blades with SCSI controller can only be fitted in slots 5 and
6. If only one 2-way server blade with SCSI controller is to be fitted, it
must go in slot 5, with a dummy server blade in slot 6.
PRIMERGY BX600 S2 Basic Unit
3 4 5
1
3 4 5
1
Installation Sequence
6 7
2 3
6 7
2
3
8 9 10
4
8 9 10
4 5
75