Fujitsu PRIMERGY BX600 S2 Operating Manual page 42

Connecting External Devices
Connectors on the back of the basic unit
1
2
3
4
Figure 9: Connectors for external devices
1, 9 Slots for various types I/O blades, connected to the server blades on-board NICs.
These I/O blades can be Ethernet switch blades or Ethernet pass-thru blades, see
"Ethernet LAN Switch Blades" on page 81
page 99.
2, 8 Slots for various types I/O blades, connected to the optional I/O modules of the
server blades. These I/O blades can be Ethernet or Fibre Channel switch blades or
pass-thru blades, see
Thru Blade" on page
Channel Pass-Thru Blade" on page
3 Serial port connector on management blade 2 (see also
Standard serial port, management communication port.
4 LAN connector on management blade 2 (see also
port, RJ45, 10Mb management LAN.
5 Serial port connector on management blade 1 (see also
Standard serial port, management communication port.
6 LAN connector on management blade 1 (see also
port, RJ45, 10Mb management LAN.
7 KVM connector on rear KVM blade, which offers VGA, PS2 keyboard and mouse
support via a special cable (see
KVM blade also offers a LAN connectors (RJ45, 10 Mb) (see also
page 134).
42
"Ethernet LAN Switch Blades" on page
99, "Fibre Channel Switch Blade" on page 105
113.
figure 10 below). The Adv. KVM bladeand the digital
Installing the Hardware
and "Ethernet Pass-Thru Blade" on
81,
figure 53 on page
figure 53 on page
figure 53 on page
figure 53 on page
PRIMERGY BX600 S2 Basic Unit
9
8
7
6
5
"Ethernet Pass-
and "Fibre
100).
100). LAN
100).
100). LAN
figure 85 on