Fujitsu PRIMERGY BX600 S2 Operating Manual page 51

Preparation for Use and Operation
3 Front identify/Fault indicator (amber LED)
Unlit:
Lights amber:
Blinks amber:
4 Front identify button
Pressing this button lights up the integrated front identify indicator. The
ID
front and rear identify indicators will be synchronized.
PRIMERGY BX600 S2 Basic Unit
The system is normal and not highlighted.
If power indicator LED lights green, basic unit is
switched ON (5 V standby power present).
This system has been selected by pressing the front or
rear identify button.
To deactivate, press one of the buttons again.
You also can activate the LED via CLI.
The system is directly controlled via the management
blade user interface.
or
SUM error: A malfunction has occurred in the system.
Operating and Indicator Elements
51