Updating The Switch Blade Firmware - Fujitsu PRIMERGY BX600 S2 Operating Manual

Updating BX600 System Components
5.4.3

Updating the Switch Blade Firmware

I
Before you update the firmware, you must allocate IP addresses to the
individual switch blades.
Proceed as follows:
Ê Switch on the basic unit and start the management console (Telnet) of the
management blade.

 -------------------------------------------------------------------------------- 
 (1) Management Agent
 (2) Emergency Management Port
 (3) Console Redirection
 (4) TFTP upgrade
 (5) Logout
 (6) Reboot Management Blade
 (7) System Information Dump
 Enter Selection: 3
Ê In the management blade console, select the menu item Console Redirection.

Console Redirection Table
 -------------------------------------------------------------------------------- 
 (1) Console Redirect Server Blade
 (2) Console Redirect Switch Blade
 (3) Set Return Hotkey , Ctrl+(a character) : 0
 Enter selection or type (0) to quit: 2
Ê In the Console Redirection Table menu, select the menu item Console Redirect
Switch Blade.
64
Preparation for Use and Operation
Console Menu page_root
page_0.
PRIMERGY BX600 S2 Basic Unit













